II) V24/RS232/485 Interface - Single Analyzers and Systems
EMBE – Write command "End of range"
With this write command the analyzers in a system or the single analyzer will get each end of range of the total range in ppm. The analog output signal will be referred to these values for instance.
Write command
EMBE Kn M1 YYYY [... Mx ZZZZ]
End of range x (optional)
Addressed range x (optional)
End of range 1
Addressed range 1
Addressed channel n
Code
Response
EMBE 0
Error status
Code
90003752(1) | AK | 2 - 95 |