EMBU – Write command "Switch levels for autoranging"
With this write command the analyzers in a system or the single analyzer will get for the called channel (device):
∗The required values in ppm to switch from one range to another with autoranging.
Write command
EMBU Kn Mn XXX YYY [Mm XXX YYY ...] (optional)
Switching value to change to the bigger range
Switching value to change to the smaller range
Range n
Addressed channel n
Code
Response
EMBU 0
Error status
Code
2 - 96 | AK | 90003752(1) |