II) V24/RS232/485 Interface - Single Analyzers and Systems
AIKG – Read command "Concentration integral value; all"
To this read command the FU will send to the TBCC the following data:
∗The corrected average signal valid at that moment (e.g. analyzed value), that has been calculated since the last "SINT" command. The physical parameter is described in the section about FU. The value will be limited to six relevant digits, because it is useless to send gas concentrations in an accuracy less than pars pro mille. Look at the example of the "AKON" command !
Cf. the "SFRZ" command !
Read command
AIKG K0
Read of the whole system unit
Code
AIKG K1 ... Kn
Read of channel n
Read of channel 1
Code
90003752(1) | AK | 2 - 49 |