Emerson PD3686 owner manual Setting The Clock

Setting The Clock

When the unit is connected to the AC outlet for the first time “– –:––” flashes on the display.

Note: Do not turn the main unit power ‘On’. The clock can only be set while the main unit power is ‘Off’.

1.) Press and hold the PRG. button. The “12H” flashes on display.

Press or button to select between “24H” 24-hour mode (no AM/PM indicators) or “12H” 12-hour mode (with AM/PM indicators) as desired.

2.) Press the PRG. button again. Just the Hour digits will continue flashing.

3.) Press the or button to set the display to the correct hour, AM or PM.

4.) Press the PRG. button again. The Minute digits will begin flashing.

5.) Press the or button to set the display to the correct minutes.

6.) Press the PRG. button once more.

Only the colon (“:”) continues flashing and the clock begins to run.

16

PD3686_021705r.p65 16

17/2/2005, 16:14