Emerson PD5100 owner manual Playing Compact Discs, Normal Playback

PLAYING COMPACT DISCS

NOTE: Although this portable CD player can read CD-R and CD-RW discs, in addition to normal CDs, the playability of CD-R and CD-RW discs may be affected by the type of software that was used to create the discs, as well as the quality and condition of the blank media you are using. 100% playability cannot be guaranteed. This is not an indication of a problem with the player.

NORMAL PLAYBACK

1.) Move the AM/FM/CD/OFF function selector to the CD position.

2.) Open the CD door by lifting the CD door OPEN/CLOSE tab. If you have not already removed the white transit card from the CD player, please remove it now.

3.) Place your CD on the center spindle with the printed label side facing up. Close the CD door. The player will read the Table of Contents and the display will show the total number of tracks on the disc.

If the disc is damaged or up side down, display shows “0 0”

4.) Press the Play/Pause button to begin playback on Track 1. The Play ‘dot’Indicator appears in the display.

5.) Adjust the VOLUME control as desired.

6.) Playback will continue until the end of the disc. When the disc ends the display again shows the total number of tracks on the disc. You may also stop playback at any time by pressing the CD Stop button.

7.) Open the CD door, remove your disc, and close the CD door again.

8.) Move the function selector to the OFF position to shut the power ‘Off’.

11

PD5100_072705.p65 11

27/7/2005, 16:12