Emerson PD5100 owner manual Preparation for USE, Unpacking and SET UP, Power Sources

PREPARATION FOR USE

UNPACKING AND SET UP

•Carefully remove the unit from the carton and remove all packing materials from the unit.

•Carefully remove any small strips of tape which may have been used to keep the CD door closed during shipment.

•Open the CD compartment by placing you finger under the OPEN/CLOSE tab on the CD door and lifting upward. Inside the CD compartment you will see a white transit card which is used to prevent the laser pick-up from moving during shipment.

Carefully remove this card and close the CD compartment door.

•Please save the carton and packing materials in the event that your unit ever needs to be returned for service. The original carton and packing materials are the only way to protect the unit from damage during shipment.

POWER SOURCES

This unit is designed to operate on 6 pcs “C” batteries, not included, or on normal 120V 60Hz AC house current.

Operating this unit from any other power source may cause damage to the unit, and such damage is not covered by your warranty.

4

PD5100_072705.p65 4

27/7/2005, 16:12