![](/images/new-backgrounds/1313979/31397931x1.webp)
7.) To begin programmed playback press the Play/Pause
button. The LCD display will show the first programmed track and playback will begin on that track.
After the last programmed track has played the player stops but the programmed tracks remain in the memory. To play the programmed tracks again, press the
Play/Pause button.
To cancel the programmed sequence from memory, press the Stop button at stop mode, open the CD door, or move the AM/FM/CD/OFF selector to the OFF position.
Program Repeat Playback
You can use the Program and Repeat features together to continuously repeat a programmed sequence of tracks.
First, program the desired tracks according to Steps 1 through 7 on previous page.
When Programmed Playback begins press the REPEAT button twice to activate the All Tracks Repeat feature.
The Repeat ‘dot’Indicator appears in display and all the tracks in your programmed sequence will be repeated continuously.
To cancel Programmed Repeat Playback press the Stop button until the Repeat ‘dot’Indicator goes ‘Off’.
STEREO HEADPHONE JACK
Connect a set of stereo headphones (not included) with a 3.5mm mini plug to the
PHONES jack (located at left panel) for private listening without disturbing
others. Before putting on the headphones reduce the VOLUME control to a low level, then put the headphones on and gradually increase the VOLUME control to a comfortable listening level. The built in speakers are automatically disconnected when headphones are connected to the headphone jack.
15
PD5100_072705.p65 | 15 |
27/7/2005, 16:12