Battery Operation

1.) Remove the battery compartment door on the bottom of the cabinet by pressing on the “OPEN ” tabs in the direction of the arrows, and lift the door up.

OPEN

OPEN

2.) Insert 8 “C”size batteries into the battery compartment according to the polarity diagram engraved inside the compartment. If the batteries are inserted incorrectly the unit will not work.

3.) Replace the battery compartment door.

NOTE: In order to operate the unit on battery power the AC cord must be disconnected from the AC socket on the back cabinet.

Battery Precautions

Replacement of batteries must be done by an adult.

Do not mix old and new batteries.

Do not mix alkaline, standard (carbon-zinc) or rechargeable (nickel-cadmium) batteries.

The supply terminals are not to be short-circuited.

Non-rechargeable batteries are not to be recharged.

Exhausted batteries are to be removed.

Only batteries of the equivalent type are to be used.

Batteries are to be inserted with the correct polarity.

Dispose of batteries properly. Do not dispose of batteries in fire. The batteries may explode or leak.

6

PD6559.60_B102306.p656

23/10/2006, 10:14

Page 7
Image 7
Emerson PD6559BK owner manual Battery Operation, Battery Precautions