After the last programmed track has played the player stops but the programmed tracks remain in the memory. To play the programmed tracks again, press the

PROGRAM button and then the PLAY/PAUSE button.

To cancel the programmed sequence from memory, press the STOP button at programming mode, open the CD door, or move the FUNCTION selector to the OFF position.

Program Repeat Playback

You can use the Program and Repeat features together to continuously repeat a programmed sequence of tracks. First, program the desired tracks according to Steps 1 through 7 in previous page. When Programmed

Playback begins press the REPEAT button twice to activate the All Tracks Repeat feature. The REPEAT ALL Indicator appears in LCD display and all the tracks in your programmed sequence will be repeated continuously.

To cancel Programmed Repeat Playback press the STOP button until both the PROGRAM and REPEAT Indicators go ‘Off’.

STEREO HEADPHONE JACK

Connect a set of stereo headphones (not included) with a 3.5mm mini plug to the

Phones jack (located at front panel) for private listening without disturbing others.

Before putting on the headphones reduce the VOLUME control to a low level, then put the headphones on and gradually increase the VOLUME control to a comfortable listening level. The built in speakers are automatically disconnected when headphones are connected to the headphone jack.

11

PD6920_C010703.p65

11

7/1/2003, 17:22

Page 12
Image 12
Emerson PD6920 owner manual Stereo Headphone Jack, Program Repeat Playback