Physical specifications, Memory specifications, Printer | HP L25500

Printer specifications

Table 8-5Mechanical accuracy

The printer's mechanical accuracy is 0.1%, but some substrates (in particular PVC banners) may shrink up to 2%.

Physical specifications

Table 8-6Printer physical specifications

Weight (including stand)	161 kg (42-in printer)
	181 kg (60-in printer)

Width	1985 mm (42-in printer)
	2465 mm (60-in printer)

Depth	690 mm

Height	1370 mm

Memory specifications

Table 8-7Memory specifications

Memory (DRAM) supplied	256 MB

Memory (DRAM) maximum	512 MB

Hard disk	50 GB

Power specifications

NOTE: An electrician is required for the setup and configuration of the building electrical system used to power the printer and also for printer installation. Make sure that your electrician is appropriately certified according to local regulations and supplied with all the information regarding the electrical configuration.

Your printer requires that the following electrical components be supplied and installed by the customer, according to the National Electrotechnical Code (NEC).

Table 8-8Single phase line specifications

	60-in printer	42-in printer

Number of power cords	2	2

Input voltage	220-240 V~ (-10%+6%)	200-240 V~ (-10%+6%)

Input frequency	50 / 60 Hz	50 / 60 Hz

Power consumption	4.8 kW (overall consumption for both	3.5 kW (overall consumption for both
	power cords)	power cords)

Maximum load current (per power cord)	15 A	13 A

Ecological specifications

This product complies with European Union WEEE and RoHS Directives.

64 Chapter 8 Printer specifications

ENWW

Image 68

HP L25500 manual Physical specifications, Memory specifications, Power specifications, Ecological specifications, Printer

Contents

HP Designjet L25500 Printer series Legal notices Trademarks Table of contents Accessories Printer specifications Safety precautions General safety guidelinesIntroduction Electrical shock hazard Mechanical hazard Heat hazardFire hazard Heavy substrate hazard Ink handling Printers main features Label Explanation Printers main components Front view 60-in printer Rear view 60-in printer Take-up reel motor Front panel Embedded Web Server Support tab Setup tabMain tab Connectivity and software instructions Connection methodConnect to a network Connection type Speed Maximum cable length Other factors Turn the printer on and off Basic setup optionsPrinter setup options Restart the printer Change the language of the front panel Embedded Web Server setup options Change the language of the Embedded Web Server Use substrate Handle the substrateOverview Substrate family Substrate types Load a roll onto the spindleSupported substrate families Load a roll onto the spindle Handle the substrate Load a roll into the printer Substrate Change loaded substrate Handle the substrate Unload a roll from the printer Normal procedure roll attached to spindleExceptional procedure roll detached from spindle Use the take-up reel Load a roll onto the take-up reel Handle the substrate Handle the substrate Handle the substrate Enww Handle the substrate Unload a roll from the take-up reel Handle the substrate View information about the substrate Store the substrate Summary Download substrate presetsAdd a new substrate type Substrate family Select printer settings and color profileSubstrate family Description HP Photorealistic 100 Setting Description If too low If too highPaper-Solvent Substrate at the beginning Vinyl Select the number of passesKey Check the ink quantity Coalescence, grain Faster printing Color calibrationColor profiles Ink cartridges Handle the ink systemInk system components Printheads Ink funnel Printhead cleaning cartridgePrinthead cleaning container Replace an ink cartridge Ink system tipsWork with ink system components Remove an ink cartridge Work with ink system components Insert an ink cartridge Replace a printhead Remove a printhead Handle the ink system Insert a printhead Handle the ink system Handle the ink system Replace the printhead cleaning kit Remove the printhead cleaning cartridge Handle the ink system Insert the printhead cleaning cartridge Replace the ink funnel Handle the ink system Order ink supplies Cartridge Printhead cleaner Printhead Change margins Print optionsPrinter states Request the printers internal prints Name AccessoriesOrder accessories Minimum Maximum Printer specificationsFunctional specifications Physical specifications Memory specificationsPower specifications Ecological specifications Environmental specifications Acoustic specifications Glossary Airflow LED Order IndexMargins Enww