Load a roll into the printer | HP L25500 specs

9.Put the blue stop on to the upper end of the spindle, and push it towards the end of the roll.

10.Slide the lever-lock to the locked position.

11.Lift the loading table to ease the spindle into the printer.

CAUTION: To avoid trapping your fingers, do not push the roll with your hands.

If you regularly use different substrates, you can change rolls more quickly if you pre-load rolls of different substrates on different spindles. Extra spindles are available for purchase.

Load a roll into the printer

To start this procedure, you need to have a roll loaded on the spindle. See Load a roll onto the spindle on page 16.

The normal minimum substrate width is 23 inches (584 mm). To load substrates down to a minimum width of 10 inches (254 mm), go to the front panel and select the icon, then select Substrate handling options > Enable narrow substrate. With this option, print quality is not guaranteed.

Handle the substrate

ENWW	Load a roll into the printer 19

Image 23

HP L25500 manual Load a roll into the printer

Contents

HP Designjet L25500 Printer series Trademarks Legal notices Table of contents Printer specifications Accessories Electrical shock hazard Safety precautionsGeneral safety guidelines Introduction Mechanical hazard Heat hazardFire hazard Ink handling Heavy substrate hazard Label Explanation Printers main features Front view 60-in printer Printers main components Rear view 60-in printer Front panel Take-up reel motor Embedded Web Server Support tab Setup tabMain tab Connection type Speed Maximum cable length Other factors Connectivity and software instructionsConnection method Connect to a network Turn the printer on and off Basic setup optionsPrinter setup options Change the language of the front panel Restart the printer Embedded Web Server setup options Change the language of the Embedded Web Server Use substrate Handle the substrateOverview Substrate family Substrate types Load a roll onto the spindleSupported substrate families Load a roll onto the spindle Handle the substrate Load a roll into the printer Substrate Change loaded substrate Handle the substrate Unload a roll from the printer Normal procedure roll attached to spindleExceptional procedure roll detached from spindle Load a roll onto the take-up reel Use the take-up reel Handle the substrate Handle the substrate Handle the substrate Enww Handle the substrate Unload a roll from the take-up reel Handle the substrate Store the substrate View information about the substrate Summary Download substrate presetsAdd a new substrate type Substrate family Select printer settings and color profileSubstrate family Description HP Photorealistic 100 Setting Description If too low If too highPaper-Solvent Substrate at the beginning Vinyl Select the number of passesKey Check the ink quantity Coalescence, grain Faster printing Color calibrationColor profiles Ink cartridges Handle the ink systemInk system components Printheads Ink funnel Printhead cleaning cartridgePrinthead cleaning container Replace an ink cartridge Ink system tipsWork with ink system components Remove an ink cartridge Work with ink system components Insert an ink cartridge Replace a printhead Remove a printhead Handle the ink system Insert a printhead Handle the ink system Handle the ink system Remove the printhead cleaning cartridge Replace the printhead cleaning kit Handle the ink system Insert the printhead cleaning cartridge Replace the ink funnel Handle the ink system Cartridge Order ink supplies Printhead Printhead cleaner Change margins Print optionsPrinter states Request the printers internal prints Name AccessoriesOrder accessories Minimum Maximum Printer specificationsFunctional specifications Ecological specifications Physical specificationsMemory specifications Power specifications Acoustic specifications Environmental specifications Airflow Glossary LED Order IndexMargins Enww