HP L25500 manual View information about the substrate, Store the substrate

Models: L25500

1 73
Download 73 pages 8.82 Kb
Page 35
Image 35

9.Unlock the take-up reel spindle by pushing the spindle lever to its uppermost position.

10.Remove the roll from the printer, pulling out the end on the right side of the printer first. Do not insert your fingers into the spindle supports during the removal process.

11.To remove the roll from the printer after you have unloaded the take-up reel, see Unload a roll from the printer on page 22.

View information about the substrate

On the printer's front panel, select the icon, and then select View loaded substrate > View substrate

details.

The following information appears on the front panel:

The roll status

The substrate family that you have selected

The width of the substrate in millimeters (estimated by the printer) If no substrate is loaded, the message Out of substrate appears.

The same information appears on the Embedded Web Server's Supplies page.

Store the substrate

The following are tips for storing substrate:

Always keep unused rolls wrapped in the plastic wrap to prevent discoloration. Rewrap partially used rolls if they are not being used.

Do not stack rolls.

Handle the substrate

ENWW

View information about the substrate 31

Page 35
Image 35
HP L25500 manual View information about the substrate, Store the substrate