
1 Introduction
Safety precautions
Before using your printer, read the following safety precautions to make sure you use the equipment safely.
General safety guidelines
●Refer to installation instructions before connecting the printer to the supply.
●There are no
●Turn off the printer, unplug both power cords from the power outlets, and call your service representative in any of the following cases:
◦The power cord or plug is damaged.
◦Liquid has entered the printer.
◦There is smoke or an unusual smell coming from the printer.
◦The printer has been dropped or the drying or curing module damaged.
◦The printer's
◦Fuses have blown.
◦The printer is not operating normally.
●Turn off the printer and unplug both power cords from the power outlets in either of the following cases:
◦During a thunderstorm
◦During a power failure
Electrical shock hazard
WARNING! The drying and curing modules operate at hazardous voltages capable of causing death or serious personal injury.
The printer uses two power cords. Unplug both power cords before servicing the printer. The printer must be connected to earthed mains outlets only.
Introduction
ENWW | Safety precautions 1 |