Changing Preset Stations (Remote Control Only)
1.) Tune to the new station you wish to memorize. When the desired station appears on the display press the PROGRAM button.
2.) Within 5 seconds press the PRESET button on the remote control repeatedly to select the preset number
that you wish to change, or select the preset number directly with the corresponding number keys.
3.) When the display is showing both the new station you wish to memorize and the preset number you wish to change, press the PROGRAM button again. Your new station will be entered in the memory and the previously memorized station will be erased from the memory.
Note: After pressing the PROGRAM button you must press either the PRESET button, the number buttons, or the PROGRAM button again within 5 seconds while the Program Indicator icon is flashing. If the icon stops flashing you cannot enter a station in memory. If this occurs press the PROGRAM button again to get the Program icon flashing and enter your station in memory as described above.
19
RS1008_ib042303.p65 | 19 |
23/4/2003, 14:51
