CD OPERATION
TO PLAY A CD (THIS UNIT CAN PLAY STANDARD OR CDR/RW DISCS)
1 |
Open the CD compartment lid by pressing the CD OPEN button. Gently press a disc, label side up, onto the spindle until it locks in place. Close the CD compartment lid. Insert headphones into the Headphones jack.
2 |
|
|
|
|
|
|
While | the | unit | is | off, | press | the |
PLAY/PAUSE (
)/POWER ON button to start playback. To pause PLAYBACK,
press the PLAY/PAUSE (
)/POWER ON button again, the display will blink. Press once again to resume playback.
3 |
|
3 | 1 |
| |
2 |
|
4 |
Adjust the VOLUME control ❶ and DBBS switch ❷ as desired. To skip forward or backward through the tracks on the disc,
press the SKIP/SEARCH 
❸ or 
❹ button. To search forward or backward through the tracks on the disc, press and hold the SKIP/SEARCH 
❸ or 
❹ button.
When the disc is through playing, it will stop. Press the STOP (■)/POWER OFF button to stop the disc before it is finished; the total number of tracks and playing time will appear. Press the STOP (■)/POWER OFF button again while in the stop mode to turn the unit off or wait approximately 60 seconds and the unit will automatically turn off.
NOTES:
•This unit is capable of playing standard CDs or 3” singles; no adapter is required.
•If a disc is inserted incorrectly, dirty, damaged or not present at all, the display will show “disc”.
•As each track is played, the track number and elapsed time are shown in the display.
•To remove the disc, open the CD Compartment, hold the edge of the CD and gently press the center spindle and lift the CD.
•The maximum time of a CD is 74 minutes for this unit.
•“OPEN” will appear in the display when the CD Door is opened.
•This unit will play standard or CDR/RW discs.
7
