POWER SOURCES
This CD player requires either two (2) “AA” cell batteries (not included) or the AC adapter (not included).
BATTERY INSTALLATION
The battery indicator ( 
) will appear in the CD display when the batteries need replacing.
1.Open the CD Compartment, then open the battery compartment door by pressing in on the tab and then
lifting it. To prevent the possibility of losing the cover, it cannot be removed.
2.Insert two (2) “AA” cell batteries (not included) according to the polarity diagram inside the battery
compartment. Alkaline batteries are recommended for the longest playing time.
BATTERY PRECAUTIONS
Follow these precautions when using batteries in this device:
1.Use only the size and type of batteries specified.
2.Be sure to follow the correct polarity when installing the batteries as indicated next to the battery compartment. Reversed batteries may cause damage to the device.
3.Do not mix different types of batteries together (e.g. Alkaline and
4.If the device is not to be used for a long period of time, remove the batteries to prevent damage or injury from possible battery leakage.
5.Do not try to recharge batteries not intended to be recharged; they can overheat and rupture. (Follow battery manufacturer’s directions.)
AC OPERATION
To operate the unit using AC power, connect the AC adapter (not included) to a 120V, 60Hz AC outlet only. Plug the small end into the DC 4.5V jack on the side of the unit and connect the other end into the AC outlet. The batteries are automatically disconnected when the AC adapter is used.
CAUTION: When not using AC power, disconnect the AC adapter from the wall outlet by pulling the plug (not the cord). Do not touch the AC adapter with wet hands. Fully insert the plug without exposing any part of the blade.
Input: 120V 60Hz AC
Output: 4.5V DC, 500 mA.
Plug: 1.7 mm Female Type with Positive Center, UL Listed.
Positive (+) 
Negative ( )
5
