Vibration: | 1g for 10-500 Hz on any axis per SAMA PMC-31-1 without |
| damage or impairment. |
| .5g for 150-2000Hz |
RFI Susceptibility: | 10V/meter – 80MHz to 1000MHz |
3.3 CONNECTORS
3.3.1 Terminal Block TB1
3-Pin Terminal Block TB1 accommodates input power from the bulk DC source. TB1 could act as a power pass-through interface to an RTU (in lieu of connector TB3) (see Table 1).
3.3.2 Terminal Block TB3
3-Pin Terminal Block TB3 typically accommodates pass-through power to the associated ControlWave RTU but could act as the Loop Supply input power interface (in lieu of connector TB1) (see Table 1).
3.3.3 Terminal Block TB2
8-Pin Terminal Block TB2 accommodates distribution (four pairs of wiring terminals) of regulated +24Vdc loop power (see Table 2).
3.4 PART NUMBERS
400095-01-7 Snap Track Mount
721708-01-3 Panel Mount
721708-02-1 35mm DIN Rail Mount
3.5 DIMINSIONS
Dimensions are provided in Figure 6.
PIP-ControlWaveLS | Page - 11 |
