Section 3
SPECIFICATIONS
3.1 OPERATING SPECIFICATIONS
Function: | Provides four isolated 24Vdc power output terminal pairs to | |
| power an RTU , a Transmitter and/or a number of | |
| I/O (associated with a particular ControlWave RTU. | |
Output Voltage : | Electrically Isolated & Regulated 24Vdc ±5%, no load or full | |
| load |
|
Output Current: | 0.2A maximum, power limited to 150% of Max. rated power | |
Supply Shutdown: | Below +9Vdc or +19Vdc (Nominal) for 12V or 24V system | |
| (respectively) |
|
| 12V System: |
|
| Max. ON Switchpoint = 8.8V | |
| Max. OFF Switchpoint = 7.8V | |
| 24V System: |
|
| Max. ON Switchpoint = 19.7V | |
| Max. OFF Switchpoint = 17.4V | |
Input Voltage: | +9 to +30 Vdc |
|
Input Current: | Supply Loading: | 24V @ 0.2A |
| Vin @ +9V | Iin Max. = .85A |
| Vin @ +12V | Iin Max. = .58A |
| Vin @ +24 | Iin Max. = .29A |
Fusing: | 2A Slow Blow (5x20 mm) Fuse for 12V/24V System | |
Electrical Isolation: | 500Vdc (Transformer Coupled) | |
Surge Suppression: | 500Vdc (MOV between 24V return and CHASSIS) | |
| 30V Transient Suppressor across | |
| Return – meets ANSI/IEEE | |
Terminations: | Fixed, Max. wire size is 16 guage | |
3.2 ENVIRONMENTAL SPECIFICATIONS
Temperature: | Operating Range: | |
| Storage Range: | |
Relative Humidity: | 15% to 95% | |
Page - 10 |
