![](/images/new-backgrounds/1260437/26043727x1.webp)
OPE RATIN G INST RUCTI ONS
•Make sure that you have extended the AC power cord to its full length. The FM antenna is built into the power cord.
•Make sure that you have installed two fresh “AAA” alkaline batteries in the remote control handset.
Setting The Time, The First Time
IMPORTANT: The first time you connect your new SmartSet® clock radio to the AC outlet the internal computer will automatically set the time correctly for the Eastern Time Zone, which is the initial default setting. The display will scan for a few seconds and then show the correct Day and Time in the Eastern zone. If you live in the Eastern Time zone, there’s nothing else to do. Your clock is set correctly and running.
If you do not live in the Eastern Time zone you must change the default zone display to your own zone. You only do this one time and the SmartSet® will remember the new default zone setting and will always return to that setting after a power interruption.
There are 7 time zones programmed into your SmartSet® clock radio as follows:
ZONE 1 — Atlantic Time
ZONE 2 — Eastern Time (Default Setting)
ZONE 3 — Central Time
ZONE 4 — Mountain Time
ZONE 5 — Pacific Time
ZONE 6 — Yukon Time
ZONE 7 — Hawaiian Time
To change the default time zone display, depress the Time Zone button.
The number “02” will appear on the display indicating that the default zone is ZONE 2, Eastern Time.
13
iC200_052906.p65 | 13 |
29/5/2006, 10:29