5.) Set the volume control of this system to a medium – high level. Press the VOLUME + button until the volume level display is reading “50”.

6.) Press Play/Pause button on your iPod® Shuffle to begin playback and adjust the Volume control on the iPod® until you achieve the desired level. If necessary you can go back and make final adjustments to the volume level on this system.

7.) To Pause, Skip Songs, or Stop playback use the controls on the iPod® Shuffle as usual. These functions cannot be operated by the controls on the main unit or the remote control. When you stop playback and leave the iPod® Shuffle connected to the USB connector the battery charging circuit begins recharging the iPod® Shuffle battery immediately.

8.) When you are finished listening or charging your iPod® Shuffle remove it from the USB connector, switch the iPod® Shuffle ‘Off’and replace the protective

cap. Press the Power button on the main unit to shut the system ‘Off’.

30

iC200_052906.p65

30

29/5/2006, 10:29

Page 31
Image 31
Emerson Process Management IC200BK owner manual IC200052906.p65 29/5/2006