S2H

DUCTLESS SPLIT SYSTEM

Dual-ZONE Heat Pump CONDENSING UNIT

P/N# 240006613, Rev. A [06/08]

i c at i o ns and Performance

Heat Pump

Nominal Capacities:

9,000 and 12,000 Btuh

DESCRIPTION

EMI offers the finest high capacity dual zone outdoor units in the ductless split market, the S2H High Capacity Condensing Unit. The S2H allows the installation of two circuits from a single outside location when space or aes- thetic requirements limit the use of locations. The S2H has easy access interconnect valves on the back of the unit and each zone is independent so no mixing of refrigerant will occur. All 9,000 and 12,000 Btuh units are equipped with the Duratec Performance package which includes a large capacity suction accumulator with surge baffles and enhanced oil management and a factory installed solid core filter drier.

All EMI products are subject to ongoing develop- ment programs so design and specifications may change without notice.

Cabinet -

• Vertically arranged side discharge

Compressors - Hermetically sealed high efficiency rotary compressors. Motors are PSC type with inherent overload protection.

Condenser Fan/Motor - The condenser fan is a large diameter, high efficiency propeller type, which is directly connected to the totally enclosed PSC motor. The S2H units are draw-through airflow design and the PSC motor is fitted with internal overload protection.

Condenser coil - Condenser coils are seamless cop- per tubing arranged in staggered configuration with enhanced aluminum fins tested to 460psig. The tubes are mechanically expanded for secure bonding to the fin shoulder.

Refrigeration Circuits - The S2H is delivered with pre-charged refrigerant for the condenser coils and evaporators while charging of field installed piping is required. Unit refrigeration service valves are solid brass for sweat connection. Solid core filter driers are factory installed on all models.

Refrigerant Run Options - The standard system will support refrigerant runs to the inside unit of 35’ of lift, up to 100’ of interconnect.

Reverse Cycle operation S2H - A four-way reversing valve, solenoid activated by 24v, is energized for cool- ing operation. A TXV with internal check valve provides proven operation through all temperature ranges when in the heat pump mode.

Controls and components:

Compressor and fan motor contactor

Capacitor

Low Voltage terminals for evaporator interconnection

Large capacity suction accumulators

Factory installed solid core filter drier

Heat pump circuits equipped with thermostatically controlled crankcase heater

Common suction pressure access point

S p e c i f

Condenser Standard Features

Scratch and dent resistant injection molded front ac- cess panel

Powder coated (2,000 hour salt spray tested) 18 and 20 gauge aluminized steel

Concealed service valves

Easy access hose connections at 45° from valve body

• Hard Start Assist

SYSTEM OPTIONS

Sea Coast Style Coated Coils / Copper-Copper coils

Wind Baffles - Louvers

Enviromaster International LLC

Web: http://www.enviromaster.com

Page 1
Image 1
EMI S2H specifications At i o ns and Performance

S2H specifications

EMI S2H is a state-of-the-art satellite communication system designed to enhance global connectivity and deliver superior services for various applications. This innovative technology has garnered attention for its versatility, reliability, and efficiency, catering to both government and commercial sectors.

One of the standout features of the EMI S2H is its high-throughput satellite capabilities, which enable it to deliver significant data bandwidth. This is particularly beneficial for applications that require real-time data transmission, such as video conferencing, live broadcasting, and emergency response communications. With its advanced frequency reuse technology, EMI S2H can efficiently utilize available bandwidth, thereby maximizing the amount of data transmitted while minimizing latency.

In terms of technologies, EMI S2H is built on a robust architecture that integrates various advanced components. The system employs multi-beam technology, allowing it to cover wide geographical areas while focusing on specific regions with high demand. This targeted approach not only improves service quality in densely populated areas but also ensures that remote regions receive stable connectivity.

Another key characteristic of EMI S2H is its adaptability. The system supports a range of frequency bands, including Ku-band and Ka-band, which enhances its capability to deliver services tailored to specific customer requirements. This flexibility makes it suitable for a diverse array of applications, from maritime and aviation communications to broadband internet access in rural areas.

Security is also a prominent feature of EMI S2H, with built-in encryption protocols to protect sensitive data. This is particularly critical for governmental and military operations, where secure communications are paramount. The system’s resilience against interference and signal jamming further enhances its reliability, ensuring continuous connectivity even in challenging environments.

Moreover, EMI S2H is environmentally conscious, designed with energy-efficient technologies that reduce its overall carbon footprint. This aligns with global efforts toward sustainable practices in the telecommunications industry.

In conclusion, EMI S2H represents a significant leap forward in satellite communication technology, offering high throughput, versatile applications, robust security measures, and an environmentally friendly design. Its innovative features make it a preferred choice for organizations seeking reliable and efficient satellite communication solutions. As the demand for connectivity continues to grow, systems like EMI S2H are pivotal in bridging the digital divide and promoting global connectivity.