Eminence Speaker ALPHALITE6A manual Footnotes, Eminence Speaker Llc, Follow us, Mission Statement

Models: ALPHALITE6A

1 2
Download 2 pages 46.98 Kb
Page 2
Image 2
MISSION STATEMENT

MISSION STATEMENT

FOOTNOTES

From design and manufacturing to the stage or studio. Once you’ve experienced the performance of Eminence, you’ll never accept anything else.

Eminence is dedicated to providing the best Quality, Value and Service to meet our customers’ needs.

*Please consult www.eminence.com for specifications of models with alternative impedances.

**

Multiple units exceed published ratings evaluated under EIA 426A specification while

 

tested in a free-air, non-temperature-controlled environment.

***The average output across the usable frequency range when applying 1W/1m into the nominal impedance. i.e: 2.83V/8Ω, 4V/16Ω. Eminence response curves are measured under the following conditions: All speakers are tested at 1W/1m using a variety of test set-ups for the appropriate impedance LMS using 0.25" supplied microphone (software

calibrated) mounted 1m from wall/baffle 2 ft. x 2 ft. baffle is

built into the wall with

the speaker mounted flush against a steel ring for

minimum

diffraction Carver PM-120

amplifier 2700 cu. ft. chamber with fiberglass on

all six surfaces (three with custom-

made wedges).

 

 

****BETA 8CX, 10CX, and 12CX are coaxial speakers with tweeter sold separately. Published usable frequency response contingent upon use of ASD:1001 HF Driver.

*****Multiple units exceeded published ratings evaluated under EIA-426A or AES specification while mounted on Eminence’s H290, H290S, or H2EA horn in a non-temperature- controlled environment.

******The average on axis output across the entire usable frequency range when applying 1W/1m into the nominal impedance, i.e. 2.83V/8Ω, 4V/16Ω. Eminence response curves are measured under the following conditions: All speakers are tested at 1W/1m using a variety of test set-ups for the appropriate impedance LMS using 0.25” supplied microphone (software calibrated) mounted 1m from wall/baffle 2ft x 2ft baffle is built into the wall with horn front mounted Carver PM-120 amplifier 2700 cu.ft. chamber with fiberglass on all six surfaces (three with custom-made wedges).

Prices, specifications and product cosmetics are subject to change without notice.

EMINENCE SPEAKER LLC

838 Mulberry Pike, Eminence, KY 40019

Follow us:

Page 2
Image 2
Eminence Speaker ALPHALITE6A manual Footnotes, Eminence Speaker Llc, Follow us, Mission Statement

FAQ

What is the average output for Eminence Speaker ALPHALITE6A?

The average output across the usable frequency range when applying 1W/1m into the nominal impedance is provided in the official manual.

What are the conditions under which Eminence response curves are measured?

Eminence response curves for all speakers are measured under specific conditions using LMS and calibrated microphone software, as outlined in the manual.

Are prices, specifications, and product cosmetics subject to change?

Yes, prices, specifications, and product cosmetics are subject to change without notice, as stated in the official manual.