Empire Comfort Systems VFSM-18-3, VFSV-16-3, VFSV-24-3 Introduction, Product Specification

Models: VFSV-30-3 VFSM -30-3 VFSR-30-3 VFSV-24-3 VFSR-24-3 VFSM-18-3 VFSR-16-3, VFSR-18-3, VFSR-24-3, VFSR-30-3, VFSV-16-3, VFSV-18-3, VFSV-24-3, VFSV-30-3, VFSM-18-3, VFSM-24-3, VFSM-30-3 VFSV-18-3 VFSV-16-3 VFSM-24-3

1 24
Download 24 pages 44.81 Kb
Page 5
Image 5
INTRODUCTION

INTRODUCTION

IMPORTANT: Read all instructions carefully before starting installation. Failure to follow these installation instructions may result in a possible fire hazard and will void the warranty.

Save this manual for future reference.

Please read this manual before installing and using the appliance. Instructions to Installer

1.Installer must leave instruction manual with owner after installation.

2.Installer must have owner fill out and mail warranty card supplied with unvented room heater/vented decorative appliance.

3.Installer should show owner how to start and operate unvented room heater/vented decorative appliance.

Always consult your local Building Department regarding regulations, codes or ordinances which apply to the installation of an unvented room heater/vented decorative appliance.

This appliance may be installed in an aftermarket* manufactured (mobile) home, where not prohibited by state or local codes.

*Aftermarket: Completion of sale, not for purpose of resale, from the manufacturer.

This appliance is only for use with the type of gas indicated on the rating plate. This appliance is not convertible for use with other gases.

New Installation

VFSV Model - variable does not operate-ON is OFF/OFF is ON-wires into the back of receiver are reversed.

Solid-fuels shall not be burned in a fireplace where a vented decorative appliance is installed.

A vented decorative appliance must be installed only in a solid-fuel burning fireplace with a working flue and constructed of non-combustible material.

Any alteration of the original design, installed other than as shown in these instructions or use with a type of gas not shown on the rating plate is the responsibility of the person and company making the change.

Important

All correspondence should refer to complete Model Number, Serial Number and type of gas.

Attention: During initial use of log you will detect an odor as the log is cured.

Notice: During initial firing of this unit, its paint will bake out, and smoke will occur. To prevent triggering of smoke alarms, ventilate the room in which the unit is installed.

WARNING: This appliance is for installation only in a solid-fuel burning masonry or UL 127 factory-built fireplace or in a listed ventless firebox enclosure. It has been design certified for these installations. Exception: DO NOT install this appliance in a factory- built fireplace that includes instructions stating it has not been tested or should not be used with unvented gas logs.

WARNING: Any modification to this unvented gas heater or its controls can be dangerous. Improper installation or use of the heater can cause serious injury or death from fire, burns, explosion or carbon monoxide poisoning.

Well Head Gas Installations

Somenatural gasutilities use"well head" gas.This mayaffect the Btu output of the unit. Contact the gas company for the heating value. Contact the manufacturer or your gas company before changing spud/orifice size.

ACCESSORIES

 

Description

Color

 

 

 

For use with VFSV, VFSM and VFSR models

 

 

 

 

EK-1

Embers Kit

 

 

 

 

ELH-1

Fireplace Hood for Vent-Free Logs

Black

 

 

 

ELH-2

Fireplace Hood for Vent-Free Logs

Brass

For use with VFSR models only

 

 

 

 

FRBC

Battery Operated Remote Control

 

 

 

 

FRBTC

Battery Operated Remote Control with Thermostat

 

FREC

Electric Remote Control

 

FWS

Wall Switch

 

GWSG-T

Wall Thermostat, Millivolt

 

TMV

Wall Thermostat, Millivolt - Reed Switch

 

PRODUCT SPECIFICATION

 

 

 

 

Natural Gas

 

 

Propane Gas

 

 

 

 

Variable

Millivolt

Manual

Variable

Millivolt

Manual

 

Regulator pressure setting

 

3.5" W.C.

3.5" W.C.

6.0"W.C.

10.0" W.C.

10.0" W.C.

10.0" W.C.

Gas inlet pressure

Max.

10.5" W.C.

10.5" W.C.

10.5"W.C.

13.0"W.C.

13.0" W.C.

13.0" W.C.

 

 

Min.

5.0" W.C.

5.0" W.C.

7.0" W.C.

11.0" W.C.

11.0" W.C.

11.0" W.C.

 

 

 

 

 

 

 

 

 

 

 

 

BTUH

BTUH

BTUH

Model

Gas

Valve Type

Max. Rate

Med. Rate

Min. Rate

VFSV-16

Natural

Variable

25,000

17,500

VFSV-16

Propane

Variable

22,500

15,750

VFSR-16

Natural

Millivolt

25,000

17,500

VFSR-16

Propane

Millivolt

22,500

15,750

VFSV-18

Natural

Variable

32,000

19,000

VFSV-18

Propane

Variable

32,000

19,000

VFSR-18

Natural

Millivolt

32,000

22,000

VFSR-18

Propane

Millivolt

32,000

22,000

VFSM-18

Natural

Manual

32,000

27,000

22,000

VFSM-18

Propane

Manual

32,000

27,000

22,000

VFSV-24

Natural

Variable

36,000

20,000

VFSV-24

Propane

Variable

36,000

20,000

VFSR-24

Natural

Millivolt

36,000

25,000

VFSR-24

Propane

Millivolt

36,000

25,000

VFSM-24

Natural

Manual

36,000

27,000

22,000

VFSM-24

Propane

Manual

36,000

27,000

22,000

VFSV-30

Natural

Variable

38,000

20,000

VFSV-30

Propane

Variable

38,000

20,000

VFSR-30

Natural

Millivolt

38,000

26,000

VFSR-30

Propane

Millivolt

38,000

26,000

VFSM-30

Natural

Manual

38,000

27,000

22,000

VFSM-30

Propane

Manual

38,000

27,000

22,000

18954-0-0705

Page 5

Page 5
Image 5
Empire Comfort Systems VFSM-18-3, VFSV-16-3, VFSV-24-3, VFSV-18-3, VFSV-30-3, VFSM -30-3 Introduction, Product Specification