Empire Products DV-35T-1 Cleaning, Oiling, Parts List, Index, Description, R-2090, Motor

OPTIONAL BLOWER INSTALLATION INSTRUCTIONS (continued)

Cleaning

The blower wheel will collect lint and could require cleaning once a year. If the air output decreases or the noise level increases, it indicates a dirty wheel. Complete removal of the wheel and scrubbing it with a brush under flowing water is recommended.

Oiling

The blower motor has an oil hole located on each end of the motor. Use #20 motor oil only. It is best to oil the motor several times during the heating season using 2 or 3 drops each time. If the motor fails to start and hums, it could be a tight bearing due to lack of oil. This may be corrected by pouring kerosene in the oil holes, allowing to stand for a few hours and then oiling properly.

		PARTS LIST
Index	Part	Description
No.	No.
1	R-2090	Motor

2632016 Motor Cushion

3RH-036 Motor Support

4642030 Blower Wheel

5RH-710 Blower Housing Assembly

69120106 Fan Control Switch

7872087 Heyco Bushing

8 DV-806 Switch Box

9DV-807 Switch Box Cover

10R-2091 Wire Assembly 19" (483mm)

118720161 Heyco Bushing

12R-2099 Cord Set 72" (1.83m)

Page 18 13117-9-0907