Emprex IRF, IRX, IRZ B. Wireless connection (for IRF model only), IRX, IRX, ENTER, Note:, Key sign, "Enter WEP/WPA, "Direct Connection

B. Wireless connection (for IRF model only)

If your LAN supports wireless access to the internet, you can configure the IRX for wireless connection.

From the Main menu, select "Configuration ￿ Network ￿ WiFi Configuration ". All the available access point will be shown on the screen. Use￿, ￿ key to select an access point. A key sign will be shown on the bottom, if the access point is protected by an encryption key. Press ENTER key to configure IRX to link to the access point.

If the access point is not key protected or the key is input already, you can select "Direct Connection" to connect to access point. If the access point is key protected, you have to input the key for the first time. Select "Enter WEP/WPA" and press ENTER key to input the key.

Press￿, ￿ key to select a character, and use ￿ key to move to next character.

Key sign

Note:

￿IRX use character selection for text entry. The character sequence is as follows,

￿Move the cursor to a character, and press￿, ￿ key until () shown. Press ￿ key to move the cursor to next character, the previous character will be deleted.

11