Emulex 4 Gb FC Host Bus Installing, Connecting, and Testing the Host Bus Adapter

1
Installing, Connecting, and Testing
the Host Bus Adapter
This guide describes how to install and configure your new Sun StorageTek™ PCI
Express Enterprise 4 Gb Fibre Channel (FC) Single and Dual Port Host Bus Adapter
(HBA). The HBA is also referred to as SG-XPCIE1FC-EM4 (single port) or SG-
XPCIE2FC-EM4 (dual port).
It contains the following topics:
■“System Requirements” on page1
■“Installing the HBA” on page 2
■“Installing the HBA Driver with the Solaris 10 OS” on page 14
■“Sun Product Information Page at Emulex” on page15
■“Diagnostic Support” on page16
Caution – Be sure to keep the Sun StorageTek PCI Express Enterprise 4 Gb FC
Single and Dual Port HBA in the antistatic bag until installation. The HBA contains
parts that can be damaged by electrostatic discharge (ESD). Before handling the
HBA, use standard methods to discharge static electricity. Place the HBA on the bag
when examining it. Retain the bag for future use.
System Requirements
Your system must have at least one PCI Express 4-lane slot to support the Sun
StorageTek PCI Express Enterprise 4 Gb FC HBA Emulex.