Emulex 4 Gb FC Host Bus manual When attaching the optical cable, be sure to

TABLE 2 LED Status (Continued)

Green LED	Yellow LED	State
On	2 Fast Blinks	2 Gb Link Rate – Normal, Link up
On	3 Fast Blinks	4 Gb Link Rate – Normal, Link up
Slow Blink	Off	Normal – Link Down
Slow Blink	On	Not Defined
Slow Blink	Slow Blink	Off-line for Download
Slow Blink	Fast Blink	Restricted Off-line Mode (Waiting for Restart)
Slow Blink	Flashing	Restricted Off-line Mode, test active
Fast blink	Off	Debug Monitor in Restricted Mode
Fast blink	On	Not Defined
Fast blink	Slow Blink	Debug Monitor in Test Fixture Mode
Fast blink	Fast Blink	Debug Monitor in Remote Debug Mode
Fast blink	Flashing	Not Defined

When attaching the optical cable, be sure to:

1. Connect the fiber-optic cable to an LC connector on the HBA (see FIGURE 3).

Port 0

Port 1

FIGURE 3 Attaching the Optical Cable

2. Connect the other end of the cable to the Fibre Channel device.

6 Sun StorageTek PCI Express Enterprise 4 Gb FC HBA Emulex Installation Guide • December 2005