The method described in section 4.5 is called “manual connect”, which means users
must manually connect and disconnect the USB device before and after using that
device, otherwise nobody else can connect that device. However, for printers and
scanners (and MFPs), the ENNUS1 server supports auto-connect so users do not need
to manually connect/disconnect. This and the next sections show you how to do this.
After the driver is installed as described in section 4.4, you can see a newly created
printer in the Control Panel’s “Printers and Faxes”. Follow the steps below to do a
NetUSB auto-connect printing.
A. In the Control Center, click the ENNUS1 server that has the desired printer (or MFP)
attached.
B. Click the desired printer (or MFP).
C. Click the “Auto Connect Printer” button and choose “Set Auto-Connect Printer”.
12