N e r s m a n u a l | Energy Speaker Systems C-R100, C-100, C-C100

TRADITIONAL CONNECTION METHOD (PLEASE SEE DIAGRAM 4)

1)Using your choice of speaker wire and termination method, connect the speaker cable (minding the positive and negative polarities), to the lower set of connectors. Ensure the terminals are tight. The gold “shorting straps” that connect the lower and upper connections must remain in place.

2)Repeat the procedure for the second speaker.

BI-WIRE METHOD (PLEASE SEE DIAGRAM 5)

This method involves using multiple cables and connectors, to access both sets of terminals on the C-Series loudspeakers simultaneously. The benefit of bi- wiring is to reduce noise, and reduce the likelihood of grounding problems, as you will have twice the thickness of cable between the amp and speakers as the traditional method would provide. For more details on the benefits of bi- wiring, please discuss this with your authorized ENERGY® retailer.

NOTE: Before starting, remove the gold “shorting straps”, which connect the top and bottom set of input terminals. To remove the straps, loosen all of the connectors and pull the straps away from the binding posts. Make sure you put them in a safe place for future use.

1)Using your choice of speaker wire and termination method, connect one speaker cable from the amplifier (minding the positive and negative polarities) to the top set of connectors. Ensure the terminals are tight.

2)Next, connect the second cable, from the same channel of your amplifier to the lower set of terminals.

3)Repeat the procedure for the second speaker.

BI-AMPLIFICATION METHOD

(Please see diagram 6)

This connection system involves the use of two separate two channel amplifiers to power one set of speakers. The idea is to have one stereo amplifier connected to one speaker, and another identical amplifier powering the second speaker. This is often referred to as “Vertical” Bi-amplification. It is the only method ENERGY® recommends.

2)Next, connect the second cable, from the amplifier's other channel to the bottom set of terminals, again ensuring a tight connection.

3)Repeat Steps 1 and 2 for the second speaker using the second amplifier.

ownersmanual

POSITIONING AND INSTALLING

YOUR SPEAKERS

LEFT AND RIGHT MAIN SPEAKERS (C-50, C-100, C-200, C-300, C-500)

The main speakers are usually placed in the front of the room, on either side of the TV or video projector. They should be placed a minimum of 6 feet apart, and if the furniture placement allows, keep them at least 12 inches from all walls. To calculate the best placement, measure the distance between the speakers themselves and the listening position. Your distance from the speakers should be roughly 1.5 times the distance the speakers are apart from each other. For example: If the distance between each speaker and the listening position is 9 feet, then the speakers should be 6 feet apart from one another. This will provide excellent stereo separation and imaging for music playback. This is just a starting point, the room's acoustics and furniture placement will vary the placement of the speaker. Use your best judgment and experiment with speaker placement. Slight adjustments can provide significant improvements in performance.

C-50, C-100, C-200

The C-50, C-100, C-200 are designed to be used as a front left or right speaker, or as a rear channel speaker. When installing the C-50, C-100 or C-200 bookshelf speakers to a wall, there is an insert built into the back of the speaker, located above the input terminals. The threaded insert is designed specifically for the ENERGY® Macromount™ bracket, which is available from your local authorized ENERGY® retailer. Please see diagram 7.

When the C-50, C-100 or C-200 are to be installed on a bookshelf or on a stand, please attach the 4 rubber bumpers to the bottom of the speaker, as this will protect both the mounting surface and the speaker from damage. Simply peel the bumper off its sheet and stick it in place on the bottom of the speaker, one bumper per corner. The rubber bumpers also help decouple the speaker from the bookshelf or stand. Please see diagram 8.

C-C50, C-C100

When the C-C50 or C-C100 is used as a center speaker, it is ideally placed as close to the center of the TV or video projector as possible. This is to ensure that voices and all sounds come from the performer's placement on screen. This may be on top, underneath, or on a shelf within a wall unit or other furniture. Use the position that provides the best sound quality, but keep in mind safety and room décor as well. The center channel works best when the front of the speaker is flush with the TV, or the shelf it rests on. If the center speaker is recessed in its placement, it will sound distant, and undefined in character. Please see diagram 9.

When the C-C50, C-C100 are to be installed on top of a television, in a cabinet or on a shelf, please attach the 4 rubber bumpers to the bottom of the speaker, as this will protect both the mounting surface and the speaker from damage.

Simply peel the bumper off its sheet and stick one bumper in each corner on the speaker. Please see diagram 8.

C-C100, C-200, C-50, C-100, C-R100 specifications

Energy Speaker Systems has long been recognized for its innovative audio solutions, offering a range of high-performance speaker systems designed to meet the diverse needs of audiophiles and casual listeners alike. Among its esteemed product line are the C-300, C-C50, C-500, C-R100, and C-100 speakers, each bringing unique characteristics and cutting-edge technologies to the table.

The Energy C-300 speakers are celebrated for their exceptional sound clarity and precise imaging. These compact bookshelf speakers utilize a high-efficiency design, allowing them to deliver a powerful sound despite their size. Equipped with a 5.5-inch woofer and a 1-inch dome tweeter, the C-300 produces rich bass and crisp highs, making them perfect for both music and home theater setups. Their sleek design ensures they fit seamlessly into any room.

The C-C50 serves a vital role as a center channel speaker. Its dual 5.5-inch woofers ensure dialogue and vocals are reproduced with clarity, while the 1-inch tweeter handles high frequencies with finesse. This speaker is essential for creating an immersive home theater experience, providing a dedicated channel for dialogue that enhances film-watching and gaming.

Stepping up in power and performance, the C-500 model features larger woofer drivers for a deeper and more impactful bass response. The 6.5-inch woofer and 1-inch tweeter in the C-500 work harmoniously to deliver a balanced sound profile that is ideal for larger rooms or demanding audio environments. Its robust construction ensures durability and longevity.

Meanwhile, the C-R100 is designed specifically for surround sound applications. This versatile speaker can be used as both rear surround and side fill speakers in a home theater setup. With its ability to produce immersive soundscapes, the C-R100 adds depth to movie and music experiences, making it a valuable addition to any multichannel audio configuration.

Lastly, the C-100 is a compact floorstanding speaker that doesn’t compromise on sound quality. Featuring a 5.5-inch woofer and a 1-inch tweeter, it produces a surprisingly powerful sound, making it an excellent choice for smaller spaces where full-sized speakers might be too cumbersome.

Across the Energy Speaker Systems lineup, advanced technologies such as high-efficiency drivers, precision-engineered cabinets, and comprehensive soundstage optimization deliver outstanding audio performance. Collectively, these speakers cater to a wide range of audio preferences, ensuring an enhanced listening experience that resonates with both music lovers and home theater enthusiasts.

Energy Speaker Systems C-R100, C-100, C-C100, C-50 N e r s m a n u a l, BI-AMPLIFICATION Method

Models: C-C100 C-200 C-50 C-100 C-R100 C-500 C-C50 C-300