Energy Tech Laboratories 105E Front Control locations and functions, Power, Contrast, Brightness

Models: 105E

1 14

Page 7

	Front Control locations and functions	E
	Front Control locations and functions	N
		N

105E

FUNC.RECALL

For an optimized adjustment of the picture following controls are available at the front.

Press this knob, the green LED lights and the power is ON. Press this knob again, the green LED disappears and the power is OFF.

1.When pressing the "FUNC" key, the LED will flash to indicate the function has been selected.

2.When function has been selected, press or to adjust picture image.

Used to adjust the picture contrast level.

Used to adjust the overall screen brightness as a compensation for ambient light.

Image 7

Contents

Introduction Feature HighlightsENERGY STAR is a U.S. registered mark Package Safety precautions and maintenanceEnd of life disposal Positioning / Ventilation N InstallationPedestal Connection Connecting to the mains N Connection to the mainsCONTRAST Front Control locations and functionsPOWER How to use Digital controlV-Center to adjust the vertical position of the image H-Size to adjust the horizontal amplitude of the imageH-Center to adjust the horizontal position of the image V-Size to adjust the vertical amplitude of the imageA User mode 12 modes AdjustmentMODE B Power Management SignallingPOWER USED POWER SAVING%I General Technical informationII Compatibility III Pin assignment Contents 15E4220T Digital Auto Scan Colour MonitorAppendix OTHER LANGUAGE VERSIONS