FORM
Changeability of this document
In complying with Johnson Controls policy for continu- ous product improvement, the information contained in this document is subject to change without notice. While Johnson Controls makes no commitment to up- date or provide current information automatically to the manual owner, that information, if applicable, can be obtained by contacting the nearest Johnson Controls service office.
It is the responsibility of operating/service personnel as to the applicability of these documents to the equipment in question. If there is any question in the mind of oper- ating/service personnel as to the applicability of these documents, then, prior to working on the equipment, they should verify with the owner whether the equipment has been modified and if current literature is available.
TABLE OF CONTENTS |
|
safety symbols | 2 |
Changeability of this document | 3 |
TABLE OF CONTENTS | 3 |
GENERAL INFORMATION | 4 |
6 | |
RIGGING | 6 |
INSTALLATION | 6 |
UNIT MOUNTING | 7 |
SEPARATION OF UNITS | 8 |
INTERCONNECTING REFRIGERANT TUBING - SPLIT INSTALLATION | 8 |
DUCTWORK | 11 |
LOUVER SIZING GUIDELINES | 11 |
ELECTRICAL WIRING | 12 |
PACKAGED UNIT | 12 |
SPLIT SYSTEM | 12 |
MOTOR AND PULLEY DATA | 14 |
BLOWER SPEED ADJUSTMENT | 14 |
15 | |
REFRIGERANT CHARGES | 15 |
PRESSURE SWITCH SETTINGS | 15 |
MAINTENANCE / SERVICE | 17 |
FILTERS | 17 |
EVAPORATOR AND CONDENSER COILS | 17 |
BLOWERS | 17 |
DRIVE BELTS | 17 |
REFRIGERANT CIRCUIT(S) | 17 |
COMFORT ALERT™ DIAGNOSTICS | 18 |
LED DESCRIPTION | 18 |
INTERPRETING THE DIAGNOSTIC LEDS | 18 |
Installation Verification | 21 |
Johnson Controls | 3 |
