Security
¾802.11i WEP, WPA, WPA2 (Encryption support TKIP/AES)
¾MAC address functions MAC address filter (AP mode)
¾802.1x IEEE802.1x Authentication
¾Station isolation
Management
¾Firmware Upgrade Upgrading firmware via web browser, setting are kept after upgrade
¾Reset & Backup Reset to factory default. User can export all setting into a file via WEB Interface.
¾Ping & Trace Route Built‐in PING function & Trace Route function in Web GUI
¾MIB MIB I, MIB II(RFC1213), Private MIB
¾SNMP V1, V2c
1.2 Package Contents
Open the package carefully, and make sure that none of the items listed below are missing. Do not discard the packing materials, in case of return; the unit must be shipped in its original package.
h1* EOC2611P
h1* PoE injector (EPE‐1212)
h1* Power Adaptor (24V/0.6A)
h1* CD with User’s Manual
h1* Quick Installation Guide (QIG)
h1* Metal Strap
h2* Special Screw Set
1.3System Requirements
The following are the minimum system requirements in order to configure the device.
hPC/AT compatible computer with an Ethernet interface.
hOperating system that supports HTTP web‐browser
