10
3. Side Heat Shields
This accessory item
comes with the hardware
(six (6) mounting screws)
necessary to install it on
the rear of the stove. This
is a two-piece heat shield,
but is installed one piece at
a time. There are pre-
punched holes on each
side of the Rear Heat
Shield; while holding each
piece of the Side Heat
Shield in place, align the
pre-punched holes in the
Side Heat Shield with the
existing holes in the Rear
Heat Shield, and fasten
with the screws provided.
See Illustration 1 for
clearances with and
without side heat shields.
Rear Heat Shield
Side
Heat
Shield
Side
Heat
Shield
Illustration 3 – Side Heat Shield and Blower Installation
Install AC-16 Optional
Blower on these (4) mounting
holes. See “Optional Blower
Instructions” on page 3 for
instructions.
Illustration 4
BRICK LAYOUT
1 – 9” x 4” x 1.25” brick (Qty. 14)
2 – 4” x 4.5” x 1.25” brick (Qty. 2)
3 – 4.5” x 4” metal plate
(Ash Drawer Plate, Qty. 1)