INSTALLATION

1.Remove all parts from inside the stove body. (If you purchased a leg unit, and it has the factory packaging, remove the body of the stove from the shroud that it is attached to, referring to Illustration 7 later in this manual. Those instructions detail how to exchange legs and pedestal, but removal of the shroud is accomplished in the same manner).

2.Select the proper location for the stove. These appliances must not be installed any closer than the minimum clearance to combustible materials shown in Illustration 1. The stove must be installed on a non-combustible surface as shown in Illustration 1 and Illustration 2.

FAILURE TO FOLLOW THE MINIMUM CLEARANCE REQUIREMENTS MAY RESULT IN AN UNSAFE INSTALLATION.

3.If non-combustible materials have been installed on the walls, obtain the minimum clearances from either the manufacturer of these materials or the local building inspector’s office.

4.Install the stovepipe INSIDE the flue collar on the top of the stove, between the stove and the chimney.

5.DO NOT use a grate to elevate the fire.

6.A clearance of 10.5” between single wall chimney connector and combustible materials is required. Check with authorities having jurisdiction in your area with any questions.

7.All pipe sections must be connected with the male (crimped) end toward the stove.

8.Fasten the stove pipe to the flue collar by the use of three sheet metal screws. Do the same at each additional joint to make the entire installation rigid.

9.Maintain the required diameter flue for the entire installation.

10.If you are connecting the stove to an old masonry flue, be sure to have it inspected for cracks and general condition. Relining with a stainless steel liner may be required.

11.It is recommended that no more than two 90-degree bends be used in the stovepipe installation. More than two 90-degree bends may decrease the amount of draw, and possibly cause smoke spillage.

12.This unit has a factory-installed damper. Do not install or use additional dampers with this unit.

13.Single wall flue pipe assemblies must not exceed 10 feet in overall length.

12

Page 11 Page 13
Page 12
Image 12
England's Stove Works 12-FPP, 50-SFP12L, 50-TFP12P, 50-SFP12P, 12-FPG, 12-FPL, 50-TFP12L, 50-SFP12G, 50-TFP12G Installation
Page 11 Page 13

50-SFP12L, 12-FPP, 50-SFP12P, 50-SFP12G, 12-FPL specifications

England's Stove Works offers a comprehensive range of wood and pellet stoves, with models like the 50-TFP12G, 12-FPG, 50-TFP12L, 50-TFP12P, and 12-FPL showcasing the brand's commitment to efficiency, quality, and innovation. These stoves are designed to provide warmth and comfort while focusing on eco-friendliness and cost-effectiveness.

Starting with the 50-TFP12G, this innovative pellet stove features a max heat output of 50,000 BTUs, making it capable of heating spaces up to 2,200 square feet. It is equipped with a large hopper that can hold up to 55 pounds of pellets, allowing for extended burn times between refueling. The unit is designed with a digital control board, offering users the ability to customize heat levels easily. Additionally, the 50-TFP12G is renowned for its low emissions, making it an environmentally friendly choice for heating.

The 12-FPG model is another standout, well-suited for smaller spaces with a cleaning-friendly design. This unit features a dependable burn system that focuses on maintaining efficiency while ensuring minimum particulate matter is released into the atmosphere. Its compact size does not compromise on strength or reliability, making it a popular choice among homeowners.

For those seeking versatility, the 50-TFP12L is designed to excel in multi-use settings. It offers a straightforward installation process, along with an attractive design that fits seamlessly into any home décor. The 50-TFP12P model emphasizes user-friendliness with a responsive remote control, allowing users to adjust temperatures from the comfort of their seating area.

Lastly, the 12-FPL stove caters to traditional wood-burning enthusiasts while incorporating modern technologies. This model includes a cast iron door and an efficient air wash system for a cleaner glass surface, ensuring optimal viewing of the fire. It also builds on England’s tradition of craftsmanship by utilizing solid steel construction for durability and performance.

Overall, the range from England's Stove Works showcases advanced technologies such as digital control systems, eco-friendly designs, and efficient combustion processes, exemplifying the evolution of home heating solutions. Each model promises not only warmth and comfort but also a conscious choice towards sustainability and efficiency.
Top Page Image Contents