Installing Optional Accessories

OPTIONAL GLASS DOORS

Models E36L, E32L, VE36L and VE32L may accept bi-fold glass doors that are fully operable or a fixed panel door that limit access to the fireplace, (see Accessories page 24).

Installing BD36/32 Series Bi-Fold Glass Doors

Follow these steps to install left and right operable panels:

1.With the handle down, completely fold the panel on its hinges.

2.With handle facing the center of the firebox opening, insert the lower pivot pin on the door panel into the hole in the bottom outer edge of the fireplace opening. See Figure 13.

3.Keep the folded door tilted and slide the upper two pins into the guide track below the upper facial edge of the firebox opening.

4.Tilt the glass assembly fully vertical until the outer pivot pin snaps into the mounting hole in the upper spring clip.

5.Once the top and bottom pins are secured, unfold the door into the closed position.

6.Repeat steps 1 through 5 for the opposite door assembly.

7.To adjust the doors, slide them partially open. Using a Phillips screwdriver, loosen the hold-down screws on the spring clips (see Figure 14).

8.Close both doors until evenly joined at the middle and note the gap as measured to the outer edges of the front face.

9.Reopen each door one at a time and retighten the hold-down screw while preserving the noted gap at each edge.

10.Repeat the process until both doors are evenly joined, spaced and working freely.

Removing Bi-Fold Glass Doors

Bi-fold doors may be removed for replacing or cleaning as follows:

1.Partially open each door and press up on the upper spring clip with a screw driver until the outer top pivot pin is free of the clip.

2.Fully fold the frame assembly and slide the upper edge towards the center of the firebox opening until the guide pins are free of the frame rail (see Figure 13).

Installing/Removing FD36/32 Series Fixed Glass Doors

Fixed glass doors may be installed as folows:

1.Hold the glass door firmly at both handles and insert top pins into the clips located below the upper facial edge of the firebox opening. Make sure the top pins snap securely into the holes on the spring clips (see Figure 15).

ELECTRIC FIREPLACE 7 INSTALLATION INSTRUCTIONS

Models: (V)E32L, (V)E32LB, (V)E32LH, (V)E32LBH (V)E36L, (V)E36LB, (V)E36LH and (V)E36LBH

Figure 13 - Installing/Removing Glass Doors

Figure 14 - Adjusting Glass Doors

SPRING CLIP

LOCATING HOLE

Figure 15 - Installing Fixed Glass Doors

2.As you push up on the glass against the tension of the spring clips, swing the lower door in toward the face until the bottom pins clear the bottom rail and seat into the locating holes on each end. (see Figure 13).

Note: If the pins do not align into the spring clips, slightly loosen the retaining screw on each clip (see Figure 14). Reinsert the panel into each spring clip and align the panel into the lower locating holes. Remove the panel, finish tighten the retaining screws in place and then reinsert the panel again.

For more information, visit www.desatech.com

111076-01C

E32, VE36, VE32, E36(L)(B)(H) specifications

Desa E32, VE36, VE32, and E36 represent a series of innovative models designed to meet the diverse needs of contemporary consumers. These products combine cutting-edge technology with practical features, creating a user-friendly experience that appeals to both residential and commercial applications.

The Desa E32 stands out for its energy efficiency and robust design, making it an ideal choice for those seeking sustainable solutions. Its exterior is built from high-quality materials, ensuring durability and resistance to wear over time. This model boasts advanced insulation technology, minimizing heat loss and enhancing performance. The E32 is equipped with a smart thermostat that allows users to program temperature settings according to their preferences, ensuring optimal comfort throughout the day.

The VE36, on the other hand, is engineered for versatility. Its sleek design and compact size make it suitable for various environments, including homes, offices, and even recreational spaces. This model features an intuitive digital interface that allows for easy operation and monitoring. With multiple heating modes and a quick heat-up time, the VE36 can adapt to any situation, providing immediate warmth when needed.

Next in line is the VE32, which emphasizes both efficiency and safety. It features an advanced safety shut-off mechanism, ensuring peace of mind for users. This model utilizes innovative heating technology to deliver consistent warmth while consuming minimal energy. The VE32 also includes a self-cleaning function, making maintenance hassle-free and increasing the lifespan of the unit.

Lastly, the E36(L)(B)(H) model offers modular designs that can be customized to suit specific needs. This multi-faceted unit can adjust its output based on the space it is heating, optimizing performance while reducing energy consumption. The inclusion of smart connectivity features allows users to control the device remotely via smartphone applications, enhancing convenience and adaptability.

In summary, Desa E32, VE36, VE32, and E36(L)(B)(H) models showcase a commitment to quality, efficiency, and user comfort. With their technological advancements, robust safety features, and stylish designs, these models are well-equipped to elevate any space while addressing modern heating challenges. Their ability to adapt to various settings makes them a valuable addition to any home or business environment.

Desa E36(L)(B)(H) Installing Optional Accessories, Electric Fireplace 7 Installation Instructions

Models: E32, VE36, VE32 E36(L)(B)(H)