Optional Brick Liners

ELECTRIC FIREPLACE INSTALLATION INSTRUCTIONS

Models: (V)E32L, (V)E32LB, (V)E32LH, (V)E32LBH (V)E36L, (V)E36LB, (V)E36LH and (V)E36LBH

Installing/Removing BL36/32E(W) Brick Liner Kits

Models (V)E36/32(L)(H) may accept optional BL36/32E(W) brick liner kits (see Accessories, page 24). The brick panels may be installed anytime after the fireplace installation is complete.

Follow these steps to install left and right panels:

1.Remove the glass doors (if equipped) follow the instructions under - Optional Glass Doors, page 7.

2.Remove each retaining screw holding the screen rods and pull entire screen and rod assembly out from the locating hole on the inside top of each screen pocket (see Figure 16).

3.Remove log bed from hearth pan and place in a safe area. The log bed is attached with contact magnets only.

4.Remove the two screws holding each face extension to the firebox. Then pull up and lift out of the positioning slot at the bottom of the hearth pan (see Figure 17).

5.Insert the brick panel, with the beveled edge first, through the firebox opening. Then tilt and angle the top edge into the brick retainer until the bevel edge contacts the imager and the panel is flat against the firebox (see Figure 18).

6.Align the heart extension over the holes near the lower edge of the brick panel and secure with 2 pan screws provided.

7.Replace the face extension using the 2 screws removed prior.

8.Repeat steps 5 through 7 for the opposite panel assembly.

9.Replace each screen assembly by positioning the screen rod into locating holes at the very top of each screen pocket and securing with the 2 Phillips screws removed prior.

Note: The rods may have to be angled into the locating holes which are exposed through a knockout at the top of each screen pocket. Once inserted, pull the free end of the rod forward until it lines up over the farthest mounting hole respectively so both rods overlap.

10.Replace the log bed over the hearth opening and center between the grate and the viewing screen.

11.Replace glass doors if removed. See Optional Glass Doors.

Figure 16 - Removing Screens/Rod Assemblies

Figure 17 - Removing Face Extensions

BRICK PANEL (BEVELED EDGE)

BRICK RETAINER

HEARTH

EXTENSION

FACE

EXTENSION

OPTIONAL HEATER ACCESSORY

Figure 18 - Installing Brick Panels and Brackets

Disconnect power before attempting any maintenance or cleaning to reduce the risk of fire, electrical shock or personal injury.

The models (V)E36/32L and (V)E36/32LB will accept the model	PANEL SCREWS
BHKE blower/heater kit. Either of 2 types of blower/heater

assemblies can be installed as follows on page 9:

Figure 19 -Locating Front Panel Screws

For more information, visit www.desatech.com

111076-01C

E32, VE36, VE32, E36(L)(B)(H) specifications

Desa E32, VE36, VE32, and E36 represent a series of innovative models designed to meet the diverse needs of contemporary consumers. These products combine cutting-edge technology with practical features, creating a user-friendly experience that appeals to both residential and commercial applications.

The Desa E32 stands out for its energy efficiency and robust design, making it an ideal choice for those seeking sustainable solutions. Its exterior is built from high-quality materials, ensuring durability and resistance to wear over time. This model boasts advanced insulation technology, minimizing heat loss and enhancing performance. The E32 is equipped with a smart thermostat that allows users to program temperature settings according to their preferences, ensuring optimal comfort throughout the day.

The VE36, on the other hand, is engineered for versatility. Its sleek design and compact size make it suitable for various environments, including homes, offices, and even recreational spaces. This model features an intuitive digital interface that allows for easy operation and monitoring. With multiple heating modes and a quick heat-up time, the VE36 can adapt to any situation, providing immediate warmth when needed.

Next in line is the VE32, which emphasizes both efficiency and safety. It features an advanced safety shut-off mechanism, ensuring peace of mind for users. This model utilizes innovative heating technology to deliver consistent warmth while consuming minimal energy. The VE32 also includes a self-cleaning function, making maintenance hassle-free and increasing the lifespan of the unit.

Lastly, the E36(L)(B)(H) model offers modular designs that can be customized to suit specific needs. This multi-faceted unit can adjust its output based on the space it is heating, optimizing performance while reducing energy consumption. The inclusion of smart connectivity features allows users to control the device remotely via smartphone applications, enhancing convenience and adaptability.

In summary, Desa E32, VE36, VE32, and E36(L)(B)(H) models showcase a commitment to quality, efficiency, and user comfort. With their technological advancements, robust safety features, and stylish designs, these models are well-equipped to elevate any space while addressing modern heating challenges. Their ability to adapt to various settings makes them a valuable addition to any home or business environment.

Desa E32, VE36, VE32 Optional Brick Liners, Installing/Removing BL36/32EW Brick Liner Kits

Models: E32, VE36, VE32 E36(L)(B)(H)