Protocol VLAN Configuration Screen
Field Definitions
Table
Use this field … | To … |
|
|
VLAN ID - upper | Display the VLAN IDs currently configured and may be selected |
part of screen | after the screen is saved to call up the Protocol Ports Configuration |
(Selectable) | screen using the ENTER key. |
|
|
Protocol Type - upper | Display the protocol type associated with the VLAN ID in the VLAN |
part of screen | ID column. This field may be selected after the screen is saved to call |
(Selectable) | up the Protocol Ports Configuration screen. |
|
|
Configured Ports | Indicate if a VLAN ID and Protocol Type applies to all configurable |
(Selectable) | ports or only those listed in the Protocol Ports Configuration screen |
| for that Priority and Protocol Type. Configurable ports are all the |
| physical ports and existing virtual interfaces (such as for ATM). |
|
|
VLAN ID | Enter the VLAN ID which will be assigned to a protocol. The VLAN |
(Modifiable) | ID may be one already created or a new one. If a new VLAN ID is |
| entered, it will be added to the VLAN Configuration with a FID of the |
| same value as the VLAN ID and a VLAN name of PROTOCOL |
| VLAN. To enter the VLAN IDs, refer to Section 3.8.2. |
|
|
Configure Ports | Apply the priority and protocol type to all or none of the configurable |
(Toggle) | ports. The choices are: |
| ALL PORTS |
| NO PORTS |
| NOTE: If ports are added or removed from the port list in the Priority |
| Ports Configuration screen described in Section 3.9, the Configured |
| Ports for the particular VLAN ID and Protocol Type will change from |
| ALL PORTS or NO PORTS to USER DEFINED PORT LIST in the |
| Protocol Priority Configuration screen. |
|
|
VLAN Configuration
