Enterasys Networks BRIM-E6 manual Installing the Brim

INSTALLING BRIMs

6. Place your BRIM behind the MIM face plate. (See Figure 2-2.)

-E6 BRIM

LNK

-T EPIM

XMT

STB

RCV

CLN

Figure 2-2. Installing the BRIM

7.Insert the connector pins of the BRIM-E6 into the mother board connector on the MIM.

8.Press down firmly on the back of the BRIM until the pins slide all the way into the connector holes.

Note: The BRIM-E6 connector must fit securely on the mother board connector.

9.Reinstall the faceplate mounting screws, and install the support post screws.

Note: Faceplate and support post screws are provided both on the MIM and in the BRIM package, for your convenience.

BRIM-E6 USER’S GUIDE Page 9