Enterasys Networks BRIM-E6 manual Parameter Typical

APPENDIX A: EPIM SPECIFICATIONS

power output at 25C equals -16.4 dBm. For a 4C temperature increase, multiply the typical coefficient (-0.15 dBm) by four, and add the result to typical output power (4 x -0.15 dBm + -16.4 dBm = -17.0 dBm)

Parameter	Typical
Transmit Power:	-15.1 dBm
Transmit Budget:	14.4 dBm
Receive Sensitivity:	-29.5 dBm
Maximum Receive	-6.99 dBm
Power:
Bit Error Rate:	Better than
	10-10

Note: The above transmitter power levels and receive sensitivity levels represent Peak Power Levels after optical overshoot. You must use a Peak Power Meter to correctly compare the above values to those you measure on any particular port. If you measure Power Levels with an Average

Page 28 BRIM-E6 USER’S GUIDE