Enterasys Networks D2G124-12, D2G124-12P set dot1x auth-config

set dot1x auth-config
15-14 Security Configuration
set dot1x auth-config
Usethiscommandtoconfigure802.1Xauthentication.
Syntax
set dot1x auth-config {[authcontrolled-portcontrol {auto | forced-auth |
forced-unauth}] [maxreq value] [quietperiod value] [reauthenabled {false | true}]
[reauthperiod value] [servertimeout timeout] [supptimeout timeout] [txperiod
value]} [port-string]
Parameters
Defaults
Ifport‐stringisnotspecified,authenticationparameterswillbesetonallports.
Mode
Switchcommand,read‐write.
authcontrolled‐
portcontrol
auto|forced‐auth|
forced‐unauth
Specifiesthe802.1Xportcontrolmode.
•auto–Setportcontrolmodetoautocontrolledportcontrol.This
isthedefaultvalue.
•forced‐auth–SetportcontrolmodetoForcedAuthorized
controlledportcontrol.
•forced‐unauth–SetportcontrolmodetoForcedUnauthorized
controlledportcontrol.
maxreqvalue Specifiesthemaximumnumberofauthenticationrequestsallowed
bythebackendauthenticationstatemachine.Vali dvalu esare1–10.
Defaultvalueis2.
quietperiodvalue Specifiesthetime(inseconds)followingafailedauthentication
beforeanotherattemptcanbemadebytheauthenticatorPAEstate
machine.Vali dvalue sare0–65535.Defaultvalueis60seconds.
reauthenabledfalse|
true
Enables(true)ordisables(false)reauthenticationcontrolofthe
reauthenticationtimerstatemachine.Defaultvalueisfalse.
reauthperiodvalue Specifiesthetimelapse(inseconds)betweenattemptsbythe
reauthenticationtimerstatemachinetoreauthenticateaport.Vali d
valuesare0–65535.Defaultvalu eis3600seconds.
servertimeouttimeout Specifiesatimeoutperiod(inseconds)fortheauthenticationserver,
usedbythebackendauthenticationstatemachine.Vali dvaluesare1
–300.Defaultvalueis30seconds.
supptimeouttimeout Specifiesatimeoutperiod(inseconds)fortheauthentication
supplicantusedbythebackendauthenticationstatemachine.Valid
valuesare1–300.Defaultvalu eis30seconds.
txperiodvalue Specifiestheperiod(inseconds)whichpassesbetweenauthenticator
PAEstatemachineEAPtransmissions.Val id valuesare0–65535.
Defaultvalueis30seconds.
port‐string (Optional)Limitstheconfigurationofdesiredsettingstospecified
port(s).Foradetaileddescriptionofpossibleport‐stringvalues, refer
to“PortStringSyntaxUsedintheCLI”onpage 4‐1.