Overview of Connecting Cables to the Access Point
2-2
Overview of Connecting Cables to the Access Point
Before cabling the Access Point 2000, you should install the Access Point to a wall or
ceiling. For detailed hardware installation procedures, see the RoamAbout Access Point
2000 Hardware Installation Guide. Figure 2-1 provides you with an illustration of the
steps listed in the following procedure.
1. Insert the PC Card into the Access Point. Refer to the RoamAbout 802.11 PC Card
Installation Guide for Regulatory and Installation information before installing the PC
Card.
Figure 2-1: Access Point 2000 Installation Overview