Enterasys Networks VH-2402S2 manual Customer Release Notes, Page 2 of

CUSTOMER RELEASE NOTES

FIRMWARE SPECIFICATION:

Status	Version No.	Type	Release Date
Current Version	2.06.06.00	Customer Patch	4/30/2004
Prior Version	2.06.05.00	Customer Release	12/18/2003
Prior Version	2.05.19	Customer Patch	11/21/2003
Prior Version	2.05.09.01	Customer Patch	10/14/2003
Prior Version	2.05.09	Customer Patch	5/15/2003
Prior Version	2.05.02.42	Customer Patch	2/21/2003
Prior Version	2.05.02.31	Customer Patch	1/16/2003

HARDWARE COMPATIBILITY:

The ELS100-S24TX2M PHY chip has changed from Rev. 5208 to 5208R. If you are currently using hardware Rev. "0F" or greater, It is necessary to use firmware version 2.01.04.01 or greater on the ELS100-SMGMT module.

The VH-SMGMT2 module requires firmware release Version 02.05.02 or later. The version of firmware must be installed on the module whether the module is used in a VH-2402S2 or a VH-2402S base unit. If the VH-SMGMT module is used in the VH-2402 base unit it must be running version 02.05.02 or later. No restriction on the VH-STACK or VH-STACK2 card is required.

BOOTPROM COMPATIBILITY:

ALL

NETWORK MANAGEMENT SOFTWARE SUPPORT:

NMS Platform	Version No.
NetSight Atlas Console	1.3.0
NetSight Atlas Inventory Manager	1.4.0

If you install this image, you may not have control of all the latest features of this product until the next version(s) of network management software. Please review the software release notes for your specific network management platform for details.

4/29/2004 P/N: 9038023-19 Subject to Change Without Notice Page: 2 of 7

F0615-L