Enterasys Networks VH-2402S2 Customer Release Notes, Supported Functionality, Features, Page 3 of

CUSTOMER RELEASE NOTES

SUPPORTED FUNCTIONALITY:

Features	Support
802.1p - Traffic Management	Yes
802.1Q - VLAN tagging and identification (256 VLANs supported)	Yes
802.1D - Spanning Tree support	Yes
IGMP v1/v2 Snooping	Yes
Address Data Base Maintenance	Yes
Local Management via TELNET (four sessions)	Yes
RMON Groups 1,2,3,9	Yes
Runtime Address Discovery	Yes
Online BOOTP/TFTP	Yes
TFTP download from a host	Yes
Broadcast Suppression	Yes
Trunking	Yes
SNMP	Yes
Modem support	Yes
Embedded HTTP Agent	Yes
Port Mirroring	Yes
Auto-Negotiation	Yes
Stacking	Yes
Redundant power support (option)	Yes
Configuration upload/download support	Yes
Port Security (MAC Locking)	Yes

INSTALLATION AND CONFIGURATION NOTES:

The VH-SMGMT2 is shipped pre-configured with the latest version of firmware, 2.05.09.01. If you would like to upgrade an existing VH-SMGMT2 with this release, please follow the TFTP download instructions that are included with your firmware image upgrade kit. TFTP download instructions are also available on the Enterasys Networks Support web site at: http://www.enterasys.com/support/techtips/tk0020-9.html

FIRMWARE CHANGES AND ENHANCEMENTS:

The following known issues have been fixed in this release of firmware:

A condition where an HTTP packet with a source IP address the same as the switch IP address would cause the switch to stop responding.

A condition where a negative length HTTP packet would cause the switch to stop responding.

A condition where a high rate of HTTP frames would cause SNMP failure to the switch.

A condition where a “negotiate authorization frame” would cause the switch to stop responding.

4/29/2004 P/N: 9038023-19 Subject to Change Without Notice Page: 3 of 7

F0615-L