![](/images/new-backgrounds/1189189/18918947x1.webp)
Figure 1-4. The LED indicators
•Power This indicator on the front panel will light green approximately 2 seconds after the Switch is powered on to indicate the ready state of the device. The LED will blink green while downloading new software for the Switch, or if the system’s configuration has changed and will light yellow when an error occurs.
•Link/Act These indicators are located to the left of each port. They are lit when there is a secure connection (or link) to a device at any of the ports. The LEDs blink whenever there is reception or transmission (i.e.
•RDP in use This indicator is lit when the optional Redundant Power Supply is being used.
Feature Summaries
The following summaries describe
Local Console Management
A local console is a terminal or a workstation running a terminal emulation program that is connected directly to the Switch via the
Local console management uses the terminal connection to operate the console program
14 |