Troubleshooting
Q1: I inserted the Utility & Driver
does not appear automatically. What should I do?
A1: If the window does not appear automatically, click Start, click Run, and type D:\autorun.exe where "D" in "D:\autorun.exe" is the letter assigned to your
Q2: I completed all the steps in the quick installation guide, but my Wireless USB Adapter is not
connecting to my access point. What should I do?
A2: First, verify that the Network Name (SSID) matches your wireless router or access point’s Network Name (SSID). Second, check your TCP/IP properties to ensure that Obtain an IP address automatically is selected. Third, open the Wireless Adapter coonfiguration Utility icon, click the Site Survey link and then click Refresh to check and see if there are any available wireless networks listed. Fourth, your wireless network may be encryption. Contact your network administrator to find the encryption type and encryption key. Then click on Configuration (Windows Vista) or Advanced (Windows XP/2000) to enter the encryption key.
Q3: Windows is unable to recognize my hardware. What should I do?
A3: First, make sure your computer meets the minimum requirements as specified in Section 1 of this quick installation guide. Second, you must complete the installation of the wireless configuration utility (as described in Section 2) before connecting the Wireless USB Adapter to your computer. Third, connect the Wireless USB Adapter to a different USB port of your computer.
Q4: I cannot open the wireless configuration utility. What should I do?
A4: First, access your device manager to make sure the adapter is installed properly. If you see a networking device with a yellow question mark or exclamation point, you will need to reinstall the device and/or the drivers. To access your device manager,
Q5: How do I install the drivers on Windows 98SE or ME?
A5: Please refer to the User's Guide included on the Driver
If you still encounter problems or have any questions regarding the
8
