Enviro 170S5FG manual Mql Electric Heat

MQL • ELECTRIC HEAT

	UNIT								BLOW-THRU ELECTRIC HEAT
											Unit Size
VOLTAGE
			02		03		04		06		08		10			12			14			17
AND PHASE
			Min	Max	Min	Max	Min	Max	Min	Max	Min	Max	Min	Max	Min		Max	Min		Max	Min		Max
	115	kW	3	5	3	5	4	5
Phase		AMPs	26.1	43.5	26.1	43.5	34.8	43.5
	208	AMPs	14.4	43.3	14.4	43.3	19.2	43.3	28.8	43.3	33.7	43.3
		kW	3	9	3	9	4	9	6	9	7	9
Single
	230	kW	3	11	3	11	4	11	6.0	11	7	11	9	11
		AMPs	13.0	47.8	13.0	47.8	17.4	47.8	26.1	47.8	30.4	47.8	39.1	47.8
	277	kW	3	13	3	13	4	13	6.0	13	7	13	9	13
		AMPs	10.8	46.9	10.8	46.9	14.4	46.9	21.7	46.9	25.3	46.9	32.5	46.9
	208	kW	3	13	3	16	4	16	4.0	16	7	16	9	16	12		16	14		16
Phase		AMPs	8.3	36.1	8.3	44.4	11.1	44.4	11.1	44.4	19.4	44.4	25.0	44.4	33.3		44.4	38.9		44.4
	230	AMPs	7.5	32.6	7.5	45.2	10.0	45.2	10.0	45.2	17.6	45.2	22.6	45.2	30.1		45.2	35.1		45.2	40.2		45.2
		kW	3	13	3	18	4	18	4.0	18	7	18	9	18	12		18	14		18	16		18
Three	460	kW	3	13	3	20	4	26	4.0	26	7	38	9	38	12		38	14		38	16		38
		AMPs	3.8	16.3	3.8	25.1	5.0	32.6	5.0	32.6	8.8	47.7	11.3	47.7	15.1		47.7	17.6		47.7	20.1		47.7
	575	kW	3	13	3	20	4	26	4.0	26	7	46	9	46	12		46	14		46	16		46
		AMPs	3.0	13.1	3.0	20.1	4.0	26.1	4.0	26.1	7.0	46.2	9.0	46.2	12.0		46.2	14.1		46.2	16.1		46.2

Notes:

1.Blow thru heaters can have a maximum of two stages.

2.VFD controllers cannot be supplied with blow thru heaters.

3.Specific kW ratings are available within the ranges shown. Refer to selection program.

4.Heaters above 480v must utilize one time secondary limits only.

	UNIT								DRAW-THRU ELECTRIC HEAT
											Unit Size
VOLTAGE
			02		03		04		06		08		10			12			14			17
AND PHASE
			Min	Max	Min	Max	Min	Max	Min	Max	Min	Max	Min	Max	Min		Max	Min		Max	Min		Max
	115	kW	3	5	3	5	4	5
Phase		AMPs	26.1	43.5	26.1	43.5	34.8	43.5
	208	kW	3	10	3	10	4	10	6.0	16	7	16	9	20
		AMPs	14.4	48.1	14.4	48.1	19.2	48.1	28.8	76.9	33.7	76.9	43.3	96.2
Single	230	kW	3	11	3	11	4	11	6.0	18	7	18	9	22
		AMPs	13.0	47.8	13.0	47.8	17.4	47.8	26.1	78.3	30.4	78.3	39.1	95.7
	277	kW	3	13	3	13	4	13	6.0	22	7	22	9	26
		AMPs	10.8	46.9	10.8	46.9	14.4	46.9	21.7	79.4	25.3	79.4	32.5	93.9
	208	kW	3	13	3	20	4	26	4.0	26	7	28	9	34	12		46	14		46	16		46
Phase		AMPs	8.3	36.1	8.3	55.5	11.1	72.2	11.1	72.2	19.4	77.7	25.0	94.4	33.3		127.7	38.9		127.7	44.4		127.7
	230	kW	3	13	3	20	4	26	4.0	26	7	32	9	34	12		49	14		49	16		49
		AMPs	7.5	32.6	7.5	50.2	10.0	65.3	10.0	65.3	17.6	80.3	22.6	85.3	30.1		123.0	35.1		123.0	40.2		123.0
Three	460	kW	3	13	3	20	4	26	4.0	26	7	52	9	64	12		76	14		88	16		96
		AMPs	3.8	16.3	3.8	25.1	5.0	32.6	5.0	32.6	8.8	65.3	11.3	80.3	15.1		95.4	17.6		110.4	20.1		120.5
	575	kW	3	13	3	20	4	26	4.0	26	7	52	9	64	12		76	14		88	16		96
		AMPs	3.0	13.1	3.0	20.1	4.0	26.1	4.0	26.1	7.0	52.2	9.0	64.3	12.0		76.3	14.1		88.4	16.1		96.4

Notes:

1.Draw thru heaters can have a maximum of four stages.

2.All heaters that have an AMP draw greater than 48 AMPs will have a minimum of two stages.

3.Specific kW ratings are available within the ranges shown. Refer to selection program.

4.Heaters above 480v must utilize one time secondary limits only.

8 ENVIRO-TEC