5. ELECTRICAL REQUIREMENTS

The ACCENT 25 will operate without electrical power. This model has a Millivolt gas control which uses the pilot flame to generate enough electricity to operate the main burners. The appliance when equipped with blower must be electrically connected and grounded in accordance with local codes or in the absence of local codes, with the current CSA C22.1 CANADIAN ELECTRICAL CODE Part 1, SAFETY STANDARDS FOR ELECTRICAL INSTALLATIONS, OR THE NATIONAL ELECTRICAL CODE ANSI / NFPA 70 in the U.S.

REMOVING / INSTALLING THE BLOWER

1.Turn the unit off, open the door and remove the log set. Remove brick panel(s) (see Removing and Installing Brick Panels). Remove the burner tray assembly by removing the two (2) screws on either side of the tray. Pull tray up at the back and lift out.

2.Disconnect the gas line to the nipple. Remove the three (3) screws holding the burner control tray to the back firewall. Lift tray up on left side and pull out.

3.Pull blower towards you. Disconnect wires from the blower and remove.

4.To re-install perform the preceding steps in reverse.

WARNING: Electrical grounding instructions. This appliance is equipped with a three-prong (grounding) plug for your protection against shock hazard, and should be plugged directly into a properly grounded three-prong outlet. DO NOT cut or remove the grounding prong from this plug.

CAUTION: Label all wires prior to disconnection when servicing controls. Wiring errors can cause improper and dangerous operation. Verify proper operation after servicing

INSTALLING REMOTE THERMOSTAT OR WALL SWITCH

RECOMMENDED WIRE SIZE for thermostat installation: 18 gauge, 2 wire solid core, Low Voltage wire. (Bell wire)

1.Install the 18 Gauge wire supplied to the two terminals on the thermostat or remote wall switch.

2.Connect the other end of the wire to the gas valve using the two outside terminals on the front of the gas valve. Use the terminals marked (TP/TH and TH).

RECOMMENDED MAXIMUM LEAD LENGTH (TWO WIRE)

WHEN USING WALL THERMOSTAT

WIRE SIZE

MAXIMUM LENGTH

14 GAUGE

100 FEET

16 GAUGE

64 FEET

18 GAUGE

40 FEET

20 GAUGE

18 FEET

8

Page 8
Image 8
Enviro 25BV owner manual Electrical Requirements, Installing Remote Thermostat or Wall Switch

25BV specifications

The Enviro 25BV is an innovative, cutting-edge solution designed for those looking to enhance energy efficiency and promote a more sustainable living environment. This versatile product is a perfect fit for both residential and commercial applications, allowing users to seamlessly integrate advanced technology into their daily lives.

One of the main features of the Enviro 25BV is its state-of-the-art energy management system. This system maximizes energy usage, ensuring that resources are utilized optimally. The smart algorithms employed by the Enviro 25BV analyze real-time data and adjust settings automatically to maintain ideal conditions, which translates to significant energy savings over time.

Another standout characteristic of the Enviro 25BV is its robust build quality. Crafted with environmentally friendly materials, the design not only prioritizes sustainability but also guarantees longevity. This durability ensures that the unit can withstand various environmental elements, further enhancing its practical applications in different settings.

The Enviro 25BV incorporates advanced filtration technologies that significantly improve indoor air quality. Equipped with a multi-stage filtration system, it effectively captures dust, allergens, and other pollutants, providing a cleaner and healthier living environment. This is particularly beneficial for individuals with respiratory issues or allergies.

Moreover, the user interface of the Enviro 25BV is designed with convenience in mind. Its intuitive controls allow users to easily adjust settings and monitor energy consumption. Additionally, compatibility with smart home systems means that users can control the unit remotely, offering an exceptional level of convenience and accessibility.

In terms of energy efficiency ratings, the Enviro 25BV exceeds industry standards, making it an ideal choice for eco-conscious consumers. Its low energy consumption not only contributes to reduced utility bills but also diminishes the overall carbon footprint, aligning with global sustainability goals.

To sum up, the Enviro 25BV stands out as a premium option that combines innovative technology with eco-friendly design. With features like an advanced energy management system, robust filtration capabilities, and user-friendly controls, it represents a substantial step forward in energy-efficient solutions. Embracing the Enviro 25BV means choosing a sustainable lifestyle that benefits both individuals and the planet.