Installation

INSTALLATION OF A LISTED, FACTORY BUILT CHIMNEY - FREESTANDING:

This is a generic set of instructions; always follow the chimney manufacturer’s instructions explicitly. Also refer to “RECOMMENDED HEIGHTS FOR FLUE PIPE”.

1.Set floor protector and stove in location in accordance with the “CLEARANCES TO COMBUSTIBLES - 1200

FREESTANDING” or “CLEARANCES TO COMBUSTIBLES - 1700 FREESTANDING”.

2.Mark the position for the ceiling hole by suspending a plumb bob from the ceiling over the exact center of your stove flue and mark a spot on the ceiling to indicate the center of the chimney.

3.Move this location, if necessary, to avoid floor joists, ceiling rafters, electrical wiring and plumbing while still maintaining required clearances. If floor joists or ceiling rafters must be cut they must be made structurally sound again. Install chimney according to chimney manufacturers instructions. A chimney connector cannot pass through an attic or roof space, closet or similar concealed space, or a floor, ceiling, wall or partition of combustible construction. In Canada, if passage through a wall or partition of combustible construction is desired, the installation shall conform to CAN/CSA-B365 Installation Code for Solid- Fuel Burning Appliances and Equipment and NFPA 211 Standard for Chimneys, Fireplaces, Vents, and Solid Fuel-Burning Appliances.

4.Mark the hole for the outside air kit.

5.Move the stove out of the way.

6.Cut a pilot hole in the ceiling.

7.Cut a hole for the ceiling penetration components and frame in the sides of the hole in both the ceiling and roof. Check, and follow chimney manufacturer’s instructions for all of these steps.

8.Install the support box and chimney through the roof. Install the slip section for the chimney connector.

9.Slip the roof flashing over the chimney and secure to the roof, being careful to keep the pipe centered in the opening. To meet the code, the chimney must extend above the roof penetration at least 3 feet (91.4 cm), and in any area within 10 feet (304.8 cm) of the roof

Figure 22: Roof Clearances.

 

Rain cap/

 

Spark arrestor cap

 

Storm Collar

 

Roof flashing

 

Roof

Insulated chimney

Attic

 

radiation shield

Ceiling

Radiation shield

Ceiling support

 

Minimum air space in

 

accordance with

 

chimney manufacturer.

 

 

Chimney

 

connector

 

Woodstove

Optional

 

fan

 

 

Pedestal

 

Hearthpad

Outside air connection

Floor

through wall or floor

 

Figure 23: Standard Vertical Installation.

23

Page 23
Image 23
Enviro 50-1040, C-10240, 1700 Freestanding, 1200 Fireplace Insert, 1700 Fireplace Insert, 1200 Freestanding Roof Clearances

1200 Fireplace Insert, 50-1040, 1200 Freestanding, 1700 Fireplace Insert, C-10240 specifications

The Enviro 1700 Freestanding, C-10240, 1700 Fireplace Insert, and 1200 Freestanding models are exceptional choices for those seeking both aesthetic appeal and efficient heating performance. These fireplaces combine advanced technology with modern design, making them suitable for various home styles while providing effective warmth.

One of the standout features of the Enviro 1700 Freestanding unit is its elegant design. Its clean lines and contemporary look allow it to blend seamlessly into any room. The fireplace is constructed from high-quality materials, ensuring durability and longevity. This model is designed to produce maximum heat output while minimizing wood consumption, making it an eco-friendly option.

The C-10240 model, designed for those who prefer a traditional fireplace insert, showcases a unique combination of classic design with innovative technology. This insert provides the warmth and ambiance of a classic wood-burning fire without compromising efficiency. It is equipped with a powerful combustion system that ensures a clean burn, reducing emissions and providing a sustainable heating solution for homes.

The 1700 Fireplace Insert model is perfect for homeowners looking for an effective way to upgrade their existing fireplace. This insert offers the benefits of modern heating technology while maintaining the charm of a traditional fireplace. It features an expansive viewing area, allowing for an impressive display of flames and creating a cozy atmosphere. Its robust design ensures that it fits snugly into existing hearths, providing an instant upgrade.

The 1200 Freestanding model is designed for versatility. Whether placed in the center of a room or in a corner, it offers a 360-degree view of the fire. This model utilizes advanced clean-burning technology, ensuring that the fire produces minimal smoke and pollutants. Its efficient heat distribution system allows for optimal warmth, making it an excellent choice for heating larger spaces.

All these models feature advanced air wash systems that keep the glass door clean for unobstructed views of the flames. Additional options, such as direct venting and multi-fuel capabilities, further enhance their flexibility and performance. Whether you opt for the 1700 Freestanding, C-10240, 1700 Fireplace Insert, or the 1200 Freestanding, you can be assured of reliable heat, stunning views, and environmentally friendly operation throughout the colder months.