Manuals / Enviro / Household Appliance / Stove

Enviro Empress, C-10804 owner manual Keep ASH PAN Free of RAW Fuel

Models: C-10804 Empress

1 13
Download 13 pages 36.36 Kb
Page 5
Image 5

Introduction

ASHES: Disposed ashes should be placed in a metal container with a tight-fitting lid. The closed container of ashes should be on a non-combustible floor on the ground, well away from all combustible materials pending final disposal. The ashes should be retained in the closed container until all cinders have thoroughly cooled before disposing of them.

ELECTRICAL: The use of a surge protected power bar is recommended. The unit must be grounded. The grounded electrical cord should be connected to a standard 120 volts, 60 hertz electrical outlet and also must be accessible. If this power cord should become damaged, a replacement power cord must be purchased from the manufacturer or a qualified ENVIRO dealer. Be careful that the electrical cord is not trapped under the appliance and that it is clear of any hot surfaces or sharp edges. This unit’s maximum power requirement is (4.1 Amps) 500 watts.

GLASS: Do not abuse the glass by striking or slamming the door. Do not attempt to operate the stove with broken glass. The stove uses ceramic glass. Replacement glass must be purchased from an ENVIRO dealer. Do not attempt to open the door and clean the glass while the unit is in operation or if glass is hot. To clean the glass, use a soft cotton cloth and mild window cleaner, gas or wood stove glass cleaner, or take a damp paper towel and dip into the fly ash. This is a very mild abrasive and will not damage the glass.

FLAMMABLE LIQUIDS: Never use gasoline, gasoline-type lantern fuel, kerosene, charcoal lighter fluid, or similar liquids to start or “freshen up” a fire in the heater. Keep all such liquids well away from the heater while it is in use.

SMOKE DETECTOR: Smoke detectors should be installed and maintained in the structure when installing and operating a pellet burning appliance.

OPERATION: The ash pan and door must be closed securely for proper and safe operation of the pellet stove. Also ensure all gaskets on the door are checked and replaced when necessary.

KEEP ASH PAN FREE OF RAW FUEL.

DO NOT PLACE UNBURNED OR NEW PELLET FUEL IN ASH PAN. A fire in the ash pan may occur.

If you have any questions with regards to your stove or the above-mentioned information, please feel free to contact your local dealer for further clarification and comments.

SINCE SHERWOOD INDUSTRIES LTD. HAS NO CONTROL OVER THE INSTALLATION OF YOUR STOVE, SHERWOOD INDUSTRIES LTD. GRANTS NO WARRANTY IMPLIED OR STATED FOR THE INSTALLATION OR MAINTENANCE OF YOUR STOVE. THEREFORE, SHERWOOD INDUSTRIES LTD. ASSUMES NO RESPONSIBILITY FOR ANY CONSEQUENTIAL DAMAGE(S).

SAVE THIS INSTRUCTION MANUAL FOR FUTURE REFERENCE

RATING LABEL LOCATION:

The rating label is located on the back of the hopper.

5

Page 4 Page 6
Page 5
Image 5
Enviro Empress, C-10804 owner manual Keep ASH PAN Free of RAW Fuel
Page 4 Page 6

C-10804, Empress specifications

Enviro Empress, model C-10804, is a cutting-edge integrated environmental management system designed to address the pressing needs of modern sustainability practices. This innovative solution combines advanced technologies to promote eco-friendly operations across various sectors, including agriculture, manufacturing, and urban planning.

One of the main features of the Enviro Empress C-10804 is its comprehensive data analytics capability. By utilizing machine learning algorithms and big data, it collects and analyzes real-time environmental data, allowing users to make informed decisions about resource allocation and waste management. This feature not only minimizes environmental impact but also enhances operational efficiency.

The C-10804 incorporates smart sensor technology, which monitors air and water quality, soil health, and energy consumption. These sensors provide continuous data streams, enabling users to identify potential issues before they escalate. For instance, if air quality drops below acceptable levels, the system can automatically activate air purification measures, ensuring compliance with environmental standards.

Another characteristic of the Enviro Empress is its modular design, allowing for easy scalability and integration into existing systems. This flexibility makes it suitable for small businesses and large enterprises alike. Companies can start with essential features and gradually expand their system as their environmental management needs evolve.

In addition, the C-10804 includes an intuitive user interface, which facilitates easy navigation and data interpretation. Users can visualize their data through customizable dashboards, enabling them to track progress toward sustainability goals efficiently. This feature empowers stakeholders at all levels to engage with environmental initiatives and fosters a culture of accountability within organizations.

Moreover, the Enviro Empress C-10804 supports renewable energy integration, making it easier for users to transition to sustainable power sources. By monitoring energy consumption patterns, the system can identify opportunities for solar or wind energy utilization, contributing to overall carbon footprint reduction.

Overall, Enviro Empress C-10804 is a powerful tool for organizations looking to enhance their environmental performance. With its advanced technologies, data-driven insights, and user-friendly features, it stands as a pivotal solution in the pursuit of sustainability and responsible resource management. As businesses increasingly prioritize environmental stewardship, the Enviro Empress will play a crucial role in shaping a greener future.