Operating Instructions

 

CONTROL BOARD FUNCTIONS:

 

 

 

1. AUGER TRIM: Used to change feed rates on LOW ONLY for poorer quality fuels. Push the Auger Trim

button until the number 1 and 5 lights appear on the Heat Level Indicator. This will increase the feed

rate to four (4) seconds ON time per Auger pulse. This is done only on LOW to allow the burning of

poor quality fuels. Push the button until the number 1 and 4 lights appear, this will reduce the Auger On

time to two (2) second. This setting is for high-grade fuel only. Push the button until just the number

1 light is on, this is for a three (3) second on time (standard setting).

 

 

2. AUGER PULSE LIGHT: This light will flash in conjunction with the auger.

 

 

 

 

3. MANUAL AUGER FEED: If the unit runs out of fuel, this

 

 

button can be used to “prime the auger system”. This button

 

 

will turn off after 60 seconds and then must be released and

 

1

pressed again.

 

 

 

4. SYSTEM LIGHT: Responsible for signaling the state of the

 

 

 

 

control board. When the light is flashing during start-up, the

 

 

stove is in an automatic start mode. When the light is solid,

 

 

the Heat Level Setting can be altered.

 

 

�

2

5. ON/OFF BUTTON: Used to turn the unit ON and OFF.

 

 

6. HEAT OUTPUT INDICATOR: Shows

the present

heat

 

MANUAL FEED

 

3

output setting.

 

 

 

4

7. HEAT LEVEL ADJUSTMENT: When

pressed, the

heat

 

output setting of the unit will change from low to high.

 

7

ON/OFF

Notes:

 

 

5

 

 

 

HEAT LEVEL

• The convection blower speed will vary automatically with the

 

 

feed rate.

 

 

 

 

• Due to varying fuel qualities this pellet stove may not operate

 

 

on lower Heat Level settings. If your unit goes out when on a

 

 

low setting move the heat level up to a higher setting.

 

Figure 3: Circuit Board Control Panel Decal. • The lowest and highest heat levels on this pellet stove are

 

 

 

 

used for adjusting and accommodating

 

Auger Trim

Auger Trim

Auger Trim

for different pellet sizes and the varying

 

energy produced by the fuels. The size

 

 

 

 

 

 

5

 

of the pellets will change the volume of

4

2 Seconds

3 Seconds

4 Seconds

fuel being fed.

 

"ON"

 

 

"ON"

"ON"

• The unit should be run at a setting

 

Factory Setting

 

 

 

1

1

1

 

where the least amount of cleaning of

 

the burn pot is needed.

 

 

 

 

Figure 4: Auger trim and heat level indicator.

8

Page 7 Page 9
Page 8
Image 8
Enviro C-11112, 50-1266 owner manual Heat Output Indicator Shows, Heat Level Adjustment When
Page 7 Page 9

C-11112, 50-1266 specifications

Enviro 50-1266, also known by its designation C-11112, is a cutting-edge product that stands out in the realm of environmentally friendly solutions. It is designed with a focus on sustainability while delivering high performance in various applications. One of its main features is its biodegradable composition, which significantly reduces environmental impact compared to traditional products. This aspect appeals to both consumers and businesses looking to adopt greener practices.

The product is formulated using advanced technologies that enhance its effectiveness. One of these technologies involves the incorporation of bio-based materials that exhibit exceptional durability and resistance to degradation. This ensures that the product maintains its integrity over time, even in challenging environments, while still being safe for the ecosystem.

Furthermore, Enviro 50-1266 features a unique formulation that allows for versatile usage across different sectors, from agriculture to industrial applications. Whether used as a cleaner, lubricant, or in manufacturing processes, its performance remains consistent and reliable. Additionally, the product is designed to be user-friendly, facilitating easy application without the need for specialized equipment or extensive training.

Another noteworthy characteristic of Enviro 50-1266 is its non-toxic nature, making it suitable for use around children and pets. This feature broadens its appeal, particularly among environmentally conscious consumers and organizations. The product not only meets but often exceeds regulatory standards for safety and environmental compliance, further establishing its credibility in the market.

In terms of customer support, the manufacturers provide comprehensive resources, including detailed guidelines for optimal use and applications. They also offer responsive customer service to address any inquiries or concerns, which enhances the overall user experience.

In summary, Enviro 50-1266, C-11112, is a versatile, sustainable solution that excels in various applications while prioritizing environmental responsibility. Its biodegradable composition, advanced manufacturing technologies, and user-friendly characteristics make it a notable choice for those seeking effective and eco-friendly alternatives. With a commitment to safety and compliance, this product not only meets modern demands but also contributes positively to the preservation of our planet.
Top Page Image Contents